One other thought. use the 2.4.25 kernel (or later in the 2.4 series.) The 2.6 kernels are missing some drivers for the OldWorld Mac peripherals. (The drivers are available as modules, but getting them installed is not [yet] automatic. I'm trying to get the developers to fix this, but not many of them seem to care...
Rick
Here's something I wrote about using the onboard SCSI and ethernet chips on my oldworld hardware under the 2.6 kernel. It may be helpful.
Rikard Borg wrote:
Hi
I'm one of those out there.... waiting with a 7200 box at home.
Rikard Borg
--
Hi Rikard,
Here's a workaround. (Thanks! and a tip of the hat to Christian Leimer <[EMAIL PROTECTED]> and Jens Schmalzing <[EMAIL PROTECTED]> for putting me onto this.)
The 2.6 initrd has many more drivers than are recognized by the hardware discover and hot-plug phases of debian-installer. In particular, two that are often needed for OldWorld PowerMacs are the drivers for the "mesh" scsi chip, and the "mace" ethernet chip, frequently used on the OldWorld Apple motherboards. Along with many others, they are located in the /lib/modules/2.6.7-powerpc/kernel/drivers/ area of the initrd.
So, if you are in that boat, all you have to do is:
1) Boot with the "DEBCONF_PRIORITY=medium" option in the BootX (or other boot-loader) kernel options line. Then, just before each of the "detect network hardware" and "detect disks" phases, switch to the Option-F2 console and do a "modprobe mace" or "modprobe mesh" respectively, then go back to the main menu on console option-F1 and proceed as normal. If your ethernet chip is not a "mace", but some other one that isn't automatically recognized, substitute the appropriate driver for it in place of "mace". Do the same, mutatis mutandis, if you have an odd-ball SCSI chip.
2) Since you loaded the drivers "behind the back" of d-i, it doesn't know to put them in the "/target/etc/modlues" file before the reboot, so you have to do that manually. Just before it reboots, switch one more time to the option-F2 console. Do a "chroot /target" and use vi (or whatever) to edit /etc/modules. Add lines for your respective "behind the back" drivers. Once you are safely out of the editor, you can exit the "chroot" by hitting ctl-D.
3) I boot using MacOS-9 and BootX, so for me there's one more step I
have to do behind d-i's back. That's to mount the (hfs) MacOS
partition and copy the kernel and initrd from /target/boot into the
appropriate places in the "System" folder on the MacOS partition. [[In
order to do this, I have to choose the "hfs" file system driver when d-i
gives me a list of optional drivers to load, and I need to have
formatted my MacOS-9 partition as hfs, not hfs+, when I was installing it.]]
I haven't yet figured out what to do if your new boot disk needs a "behind the back" driver. (You're in a catch-22 situation. You need the driver to read the /etc/modules file that tells it to load the driver!) I think you have to edit the "/etc/modules" file on the initrd to have it load the necessary modules before it mounts the "real" root. That's not difficult to do if you have a functioning Linux you can boot into with access to the initrd, but if you are installing from scratch, I don't think you have that option.
Let me know if you have any trouble with this procedure. I'll try to help any way I can.
Enjoy!
Rick
On Tuesday, August 10, 2004, at 10:02 PM, Eric D. Hedekar wrote:
Any one of these three bugs will render debian-installer unusable for
anyone with anything but a "plain vanilla" hardware or networking
environment who doesn't have help from a competant System
Administrator, or have such skills personally. Since I'm the only one
on this list who cares two figs about OldWorld PowerPC hardware, and I
have UNIX SysAdmin experience going back 25 years (including some
pretty unusual hardware!), I guess it's not a show stopper... Still,
there *might* be some folks out there in the "real world" (TM), who
will be disappointed that they can't figure out how to install the new
Debian release on their particular old Macintosh hardware. You never
know!
Hi, I never recieved your original e-mail, however I have a Umax S-900 that
does not want to load the new installer. I have attempted to load woody and
upgrade but I would rather do a fresh install and wipe the old stuff clean.
Do you have any tips specific to this box? (I recieved the response you gave
to the 7600 so if there's something there that I need to do, don't bother to
retype it, just reference to it)
-Thanks. Eric Hedekar
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
