Package: installation-reports INSTALL REPORT
Debian-installer-version: RC1 sparc64/netboot/boot.img
uname -a: Linux ultra5 2.4.26-sparc64 #1 Sun Jun 20 02:39:17 PDT 2004 sparc64 GNU/Linux
Date: 2004_08_11
Method:
tftpboot, dhcp, ftp install
Machine: Sun ultra5
Processor: UltraSparc IIi 270 Mhz
Memory: 192 Mo
Root Device: /dev/hda 20 Go
Root Size/partition table:
Disk /dev/hda (Sun disk label): 16 heads, 63 sectors, 38792 cylinders
Units = cylinders of 1008 * 512 bytes
Device Flag Start End Blocks Id System
/dev/hda1 0 37799 19050696 1 Boot
/dev/hda2 37799 38792 500472 82 Linux swap
/dev/hda3 0 38792 19551168 5 Whole disk
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge
(rev 11)
0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge
(rev 11)
0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT
[Mach64 GT] (rev 9a)
0000:01:03.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646
(rev 03)
0000:00:00.0 0600: 108e:a000
0000:00:01.0 0604: 108e:5000 (rev 11)
0000:00:01.1 0604: 108e:5000 (rev 11)
0000:01:01.0 0680: 108e:1000 (rev 01)
0000:01:01.1 0200: 108e:1001 (rev 01)
0000:01:02.0 0300: 1002:4754 (rev 9a)
0000:01:03.0 0101: 1095:0646 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [ O]
Configure network HW: [ O]
Config network: [ O]
Detect CD: [ ]
Load installer modules: [ O]
Detect hard drives: [ O]
Partition hard drives: [ O]
Create file systems: [ O]
Mount partitions: [ O]
Install base system: [ O]
Install boot loader: [ O]
Reboot: [ O]
Comments/Problems:
Tftpboot. No framebuffer (disabled by default on sparc I think) so
languagechooser was a little dirty but readable. I was able to do a
french install with a standard us sunkeyboard.
Partman didn't propose the automatic partitioning but it did a great
job and created the sun disklabel and the partitions.
I didn't try to do a X install. Will do another install.
Thanks for your work !
--
Thomas Poindessous
partman.gz
Description: Binary data
