Package: installation-reports INSTALL REPORT
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso uname -a: Linux sarge-rc1 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux Date: 2004-08-11 ca. 16:30 CEST Method: Created a VM (VMware running on woody), single 2GB disk, boot from ISO image (as IDE CD-ROM), other packages from gd.tuwien.ac.at and security.debian.org (http), no proxy. Machine: DELL Dimension 8300 Processor: Intel Pentium 4, 2800MHz Memory: 256Mb (inside VM) Root Device: /dev/scd1 Root Size/partition table: Disk /dev/sda: 2147 MB, 2147483648 bytes 255 heads, 63 sectors/track, 261 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 245 1967931 83 Linux /dev/sda2 246 261 128520 5 Extended /dev/sda5 246 261 128488+ 82 Linux swap Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 08) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 08) 0000:00:0f.0 VGA compatible controller: VMWare Inc [VMWare SVGA II] PCI Display Adapter 0000:00:10.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10] (rev 01) 0000:00:11.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10) 0000:00:12.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02) 0000:00:00.0 0600: 8086:7190 (rev 01) 0000:00:01.0 0604: 8086:7191 (rev 01) 0000:00:07.0 0601: 8086:7110 (rev 08) 0000:00:07.1 0101: 8086:7111 (rev 01) 0000:00:07.2 0c03: 8086:7112 0000:00:07.3 0680: 8086:7113 (rev 08) 0000:00:0f.0 0300: 15ad:0405 0000:00:10.0 0100: 104b:1040 (rev 01) 0000:00:11.0 0200: 1022:2000 (rev 10) 0000:00:12.0 0401: 1274:1371 (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: No problems for this "default" install. Ideas: - Blank lines in the menus should not be selectable. - It would be helpful if strings in configuration dialogs were overwritten by default, and only after pressing an "edit" key (cursor movement, backspace, ...) changed to edit mode, like it is done in "Midnight Commander" dialogs. - English language will probably be selected also by people who do not live in an English-speaking country (like me), therefore the full selection of areas would make sense for this language. Maybe the English-speaking regions should still appear on top. Keep up the good work! Benjamin -- Seek freedom and become captive of your desires. Seek discipline and find your liberty. -- Frank Herbert, Dune Chronicles -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
