Package: installation-reports INSTALL REPORT
Debian-installer-version: Sarge netinst snaphost jul/221 from http://cdimage.debian.org/pub/cdimage-testing/daily/i386/ uname -a: Linux orni 2.6.7 #1 Tue Aug 10 12:27:58 BRT 2004 i686 GNU/Linux Date: jul/22 Method: booted from netinst cd, network install using brazilian mirror ftp.br.debian.org Machine: ECS G50 Notebook Processor: Celeron 1.6 Memory: 512 MB Root Device: Seagate 40Gb - ST94011A, ATA DISK drive hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) EXT3 FS on hda5, internal journal Root Size/partition table: Filesystem 1K-blocks Used Available Use% Mounted on /dev/hda5 32G 29G 1.6G 95% / tmpfs 245M 0 245M 0% /dev/shm Output of lspci and lspci -n: # lspci 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 14) 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016 0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) 0000:00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter # lspci -n 0000:00:00.0 0600: 1039:0651 (rev 02) 0000:00:01.0 0604: 1039:0001 0000:00:02.0 0601: 1039:0962 (rev 14) 0000:00:02.1 0c05: 1039:0016 0000:00:02.3 0c00: 1039:7007 0000:00:02.5 0101: 1039:5513 0000:00:02.6 0703: 1039:7013 (rev a0) 0000:00:02.7 0401: 1039:7012 (rev a0) 0000:00:03.0 0c03: 1039:7001 (rev 0f) 0000:00:03.1 0c03: 1039:7001 (rev 0f) 0000:00:03.2 0c03: 1039:7001 (rev 0f) 0000:00:03.3 0c03: 1039:7002 0000:00:04.0 0200: 1039:0900 (rev 91) 0000:00:0a.0 0607: 1524:1410 0000:01:00.0 0300: 1039:6325 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: CardBus Card not correctly detected when inserted! cardctl shows there is a card # cardctl status Socket 0: 3.3V CardBus card function 0: [ready] then lspci shows exactly the same output as above (without the card inserted) and cardmgr doesn't detect the card ! ii pcmcia-cs 3.2.5-8 PCMCIA Card Services for Linux I don't know if this is a kernel issue, so i'm posting here anyway. Except for the xfree config file, that i've used the one generated by knoppix to avoid manually configuring, everything else worked perfectly. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
