Package: installation-reports INSTALL REPORT
Debian-installer-version: RC1 netinst, with base uname -a: Linux debian 2.6.7-1-686 #1 Thu Jul 8 05:36:53 EDT 2004 i686 GNU/Linux Date: Sat, 14 Aug 2004 16:38:03 +0200 Method: Boot from harddisc, 2.6-install Machine: Pentium II, Celeron 400mhz Memory: 128MB Root Device: IDE, /dev/hda2 Root Size/partition table: Device Boot Start End Blocks Id System /dev/hda1 1 16 128488+ 83 Linux /dev/hda2 * 17 1192 9446220 83 Linux /dev/hda3 1193 1247 441787+ f W95 Ext'd (LBA) /dev/hda5 1193 1247 441756 82 Linux swap Output of lspci and lspci -n: lspci: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 0000:00:0e.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:00:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 11) -n: Disk /dev/hda: 10.2 GB, 10260710400 bytes 255 heads, 63 sectors/track, 1247 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes 0000:00:00.0 0600: 8086:7190 (rev 02) 0000:00:01.0 0604: 8086:7191 (rev 02) 0000:00:07.0 0601: 8086:7110 (rev 02) 0000:00:07.1 0101: 8086:7111 (rev 01) 0000:00:07.2 0c03: 8086:7112 (rev 01) 0000:00:07.3 0680: 8086:7113 (rev 02) 0000:00:0c.0 0200: 10ec:8029 0000:00:0e.0 0400: 109e:036e (rev 11) 0000:00:0e.1 0480: 109e:0878 (rev 11) 0000:01:00.0 0300: 10de:0028 (rev 11) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] see note below Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Wohooo, a great install again. Everything went fine. I chose "Desktop Environment" in Tasksel... my Nvidia-TNT2, mouse and X were configured fine! I booted off /dev/hda1 where the installer iso was saved. But when I look into my fstab, /dev/hda1 gets mounted on /media/usb0?? uh? Why usb0? Dennis # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda2 / ext3 defaults,errors=remount-ro 0 1 /dev/hda5 none swap sw 0 0 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 /dev/hda1 /media/usb0 auto rw,user,noauto 0 0 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
