Package: installation-reports Debian-installer-version: 20040815 uname -a: Linux left 2.4.26-1-386 #1 Thu Jul 22 12:46:23 JST 2004 i686 GNU/Linux Date: Sun, 15 Aug 2004 21:11:53 -0700 Method: netinst image from ATAPI CD-ROM; mirrors.kernel.org as apt source; no proxy Machine: generic, ASUS TUV4X motherboard Processor: Intel P3/1133MHz Memory: 1GiB Root Device: /dev/hda1 Root Size/partition table: Disk /dev/hda: 7476 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System Mount Point /dev/hda1 * 0+ 17 18- 144553+ 83 Linux/ext3 / /dev/hda2 18 7475 7458 59906385 5 Extended n/a /dev/hda3 0 - 0 0 0 Empty n/a /dev/hda4 0 - 0 0 0 Empty n/a /dev/hda5 18+ 625 608- 4883728+ 83 Linux/ext3 /usr /dev/hda6 626+ 990 365- 2931831 83 Linux/ext3 /var /dev/hda7 991+ 1039 49- 393561 83 Linux/ext3 /tmp /dev/hda8 1040+ 7413 6374- 51199123+ 83 Linux/ext3 /home /dev/hda9 7414+ 7475 62- 497983+ 82 Linux swap n/a Output of lspci: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) 0000:00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) 0000:00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 0000:00:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0c) 0000:00:0b.0 VGA compatible controller: Number 9 Computer Company Imagine 128-II (rev 02) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Nice work. debian-installer is much cleaner than boot-floppies for basic installs, and will hopefully be less daunting for new users. The expert mode will take some getting used to. It doesn't have the feeling of a clean flow that boot-floppies had, but I do like the added features. The ability to load configuration settings from network or disk would be a nice addition to the next major revision. -- Wayne -- Wayne A. Tucker Sr. Network Engineer, Aspiring Guru [EMAIL PROTECTED] DONOBI, Inc. <http://www.donobi.com/> +1-360-473-1169 "The Internet Solutions Company" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
