Package: installation-reports Debian-installer-version: rc1 uname -a: Linux etdb 2.6.7-1-686 #1 Thu Jul 8 05:36:53 EDT 2004 i686 GNU/Linux Date: Wed Aug 18 14:53:57 EEST 2004 Method: floppy buut, usb memory with netinstall iso
Machine: Dell Optiplex GX1 Processor: Pentium 2 400MHz Memory: 128MB Root Device: IDE one disk Output of lspci: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 0000:00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [E] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Is there any way to run bad blocks without using expert mode? I already upgraded my kernel so uname output isn't from same kernel which I used when installing. Btw why there in no 2.6 kernel boot floppies? -- Janne Kujanp��
