On Fri, 20 Aug 2004, Sven Luther wrote:
> Mmm, what date was your sarge installcd ? There has been a known bug in there > somehow about the framebuffer loading thingy. i tried so emulate a enduser and downloaded it on windows 2 days ago via bittorrent (weekly build) > Now, it still is a kernel problem, since the radeonfb module should use the > DCC bus to interogate the monitor and read the EDID info back, and based on > this set a video mode supported by said monitor. this is what 2.6.7-k7 radeonfb says after successfully installing sarge (via bootparam not to use fbdev to while installing) radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=275.00 Mhz, System=250.00 MHz radeonfb: Monitor 1 type DFP found radeonfb: EDID probed radeonfb: Monitor 2 type no found radeonfb: ATI Radeon If DDR SGRAM 128 MB the x11-logfile gives this information: (II) RADEON(0): Monitor1 EDID data --------------------------- (II) RADEON(0): Manufacturer: PTS Model: 2315 Serial#: 105886 (II) RADEON(0): Year: 2003 Week: 29 (II) RADEON(0): EDID Version: 1.3 (II) RADEON(0): Digital Display Input (II) RADEON(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23 (II) RADEON(0): Gamma: 2.37 (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) RADEON(0): redX: 0.617 redY: 0.347 greenX: 0.290 greenY: 0.593 (II) RADEON(0): blueX: 0.148 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 (II) RADEON(0): Supported VESA Video Modes: (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): [EMAIL PROTECTED] (II) RADEON(0): Manufacturer's mask: 0 (II) RADEON(0): Supported Future Video Modes: (II) RADEON(0): #0: hsize: 800 vsize 600 refresh: 72 vid: 19525 (II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293 (II) RADEON(0): #2: hsize: 640 vsize 480 refresh: 60 vid: 16433 (II) RADEON(0): #3: hsize: 640 vsize 480 refresh: 75 vid: 20273 (II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 60 vid: 16453 (II) RADEON(0): #5: hsize: 1024 vsize 768 refresh: 60 vid: 16481 (II) RADEON(0): #6: hsize: 1024 vsize 768 refresh: 70 vid: 19041 (II) RADEON(0): #7: hsize: 1024 vsize 768 refresh: 75 vid: 20321 (II) RADEON(0): Supported additional Video Mode: (II) RADEON(0): clock: 78.8 MHz Image Size: 304 x 228 mm (II) RADEON(0): h_active: 1024 h_sync: 1040 h_sync_end 1136 h_blank_end 1312 h_border: 0 (II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800 v_border: 0 (II) RADEON(0): Serial No: FJRZ370105886 (II) RADEON(0): Monitor name: PS576D (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 60 kHz, PixClock max 80 MHz (II) RADEON(0): End of Monitor1 EDID data -------------------- > Sure, now, if d-i give it bogus module option, there may be a problem, but i > think not. Look at /lib/debian-installer-startup.d/S45frambuffer... or > something such, i think. > > But try one of the daily builds first to check if it is not fixed. will do that if i find a working iso and some time regards roh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
