Package: installation-reports
INSTALL REPORT
Debian-installer-version: 06 Aug 2004 - http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso
uname -a: Linux vdsrv02 2.4.26-1-386 #1 Thu Jul 22 12:46:23 JST 2004 i686 GNU/Linux
Date: 26 Aug 2004 - 23:35
Method: How did you install? net-installer
What did you boot off? cdrom
If network install, from where? http://ftp.debian.skynet.be
Proxied? Nope
Machine: aopen xcube
Processor: intel pentium 4 supporting hyperthreading
Memory: 1Gig
Root Device: IDE Name of device? hda
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where. hda1 50M ext3, bootable, /boot
hda2 2G swap
hda3 117G ext3, /Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:07.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet (rev 03)
0000:01:0d.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61)
# lspci -n 0000:00:00.0 0600: 8086:2570 (rev 02) 0000:00:02.0 0300: 8086:2572 (rev 02) 0000:00:1d.0 0c03: 8086:24d2 (rev 02) 0000:00:1d.1 0c03: 8086:24d4 (rev 02) 0000:00:1d.2 0c03: 8086:24d7 (rev 02) 0000:00:1d.3 0c03: 8086:24de (rev 02) 0000:00:1d.7 0c03: 8086:24dd (rev 02) 0000:00:1e.0 0604: 8086:244e (rev c2) 0000:00:1f.0 0601: 8086:24d0 (rev 02) 0000:00:1f.2 0101: 8086:24d1 (rev 02) 0000:00:1f.3 0c05: 8086:24d3 (rev 02) 0000:00:1f.5 0401: 8086:24d5 (rev 02) 0000:01:04.0 0200: 10ec:8139 (rev 10) 0000:01:07.0 0200: 14e4:1653 (rev 03) 0000:01:0d.0 0c00: 11c1:5811 (rev 61)
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [E]
Comments/Problems:
1/ reboot failed exactly in the same way as described here: http://lists.debian.org/debian-boot/2004/08/msg01897.html
resolution with the rmmod i810-tco worked very well though
2/ compared to lsmod and lspci dumps from an earlier try with knoppix lead me to think that quite some hardware has not been detected yet, need to investigate more, I want to get into building the 2.6 kernel anyways.
3/ none of the other boot options worked though for me
3a/ 'linux26' or 'expert26' will not detect the cd (leaving me clueless)
3b/ 'expert' to select kernel 2.6 image will reboot to kernel panic: Attempted to kill init! mentioning above that the /dev/console could not be found.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
-- Marc Portier http://outerthought.org/ Outerthought - Open Source, Java & XML Competence Support Center Read my weblog at http://blogs.cocoondev.org/mpo/ [EMAIL PROTECTED] [EMAIL PROTECTED]
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
