Package: installation-reports Debian-installer-version: 30th Aug 2004 RC1 uname -a: Linux www 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686 GNU/Linux Date: 30th Aug 2004 Method: Boot from CDROM followed by a network install - direct connection to my ADSL router.
Machine: Dell Optiplex GX1 Processor: P2 450MHz Memory: 96MByte Root Device: IDE (6.5Gbyte quantum fireball) Root Size/partition table: Disk /dev/hda: 6448 MB, 6448619520 bytes 255 heads, 63 sectors/track, 784 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 729 5855661 83 Linux /dev/hda2 730 784 441787+ 82 Linux swap /dev/hda1 mounted as / Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) 0000:00:00.0 0600: 8086:7190 (rev 03) 0000:00:01.0 0604: 8086:7191 (rev 03) 0000:00:07.0 0601: 8086:7110 (rev 02) 0000:00:07.1 0101: 8086:7111 (rev 01) 0000:00:07.2 0c03: 8086:7112 (rev 01) 0000:00:07.3 0680: 8086:7113 (rev 02) 0000:00:11.0 0200: 10b7:9055 (rev 24) 0000:01:00.0 0300: 1002:4742 (rev 5c) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [E] Comments/Problems: When I gave apt the adresses of the locations to use to install the packages from, it downloaded the package description files OK, but then wouldn't let me continue onto the next page of the installation without me having to cancel that operation and then manually tell it to go onto the next operation, which seemed a bit odd. When it rebooted it did not load the network driver. I had to add an alias "eth0 3c59x" into my modutils directory and update modules.conf. No other problems apart from that, and some of the formatting looks a bit off on some of the screens. Thanks Matt Nottingham -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
