Package: installation-reports Debian-installer-version: <Sep 12 10:35:00 UTC 2004 - http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso> uname -a: <Linux sarge26 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT i686 unknown> Date: <Sun Sep 12 12:54:57 UTC 2004> Method: <boot from cdrom, expert26>
Machine: <VMware Workstation 3.1.1 build-1790 on Linux sarge 2.4.25 (custom kernel)> Processor: vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 10 cpu MHz : 1002.292 cache size : 256 KB Memory: 160MB Root Device: <SCSI BusLogic> Root Size/partition table: <4GB disk default partitioned and formatted: 8 0 4088542 sda 8 1 3879666 sda1 / ext3 8 2 1 sda2 extended 8 5 208813 sda5 swap Output of lspci and lspci -n: lspci: not found Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [ ] Reboot: [ ] Comments/Problems: These are the last lines of /var/log/messages: ... dpkg: base-passwd: dependency problems, but configuring anyway as you request: base-passwd depends on libc6 (>= 2.3.2.ds1-4); however: Package libc6 is not installed Setting up base passwd (3.5.7) ... dpkg: base files: dependency problems, but configuring anyway as you request: base-files depends on awk; however: Package awk is not installed. Setting up base-files (3.1) ... subprocess post-installation script killed by signal (Segmentation fault) Errors were encountered while processing: base-files umount: /target/dev/pts: No such file or directory umount: /target/dev/shm: No such file or directory umount: /target/proc/bus/usb: Invalid argument I tried several times the install, and I noticed that using linux26 all is ok. Using expert26 generates the error, always the same error. I always selected the default choices (apart location, that is Europe/Italy), so I suppose the error does not deped from different choices between normal and expert mode. Network was correctly configured with DHCP (no default route, but I do not need it because I have all the debs files in my host computer). I correctly verified the iso file integrity. I kept the vmware installation directory with the disk-file and the RAM (I suspended the machine), so I can give you all if you need (140 MB tgz file). At your disposal for further tests: simply email me if you need! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
