Package: installation-reports
INSTALL REPORT
Debian-installer-version: I downloaded http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso around 8/26/4
uname -a: Linux aerodactyl 2.4.26-1-386 #1 Thu Jul 22 12:46:23 JST 2004 i686 GNU/Linux
Date: Sun Sep 12 21:28:32 EDT 2004
Method: CD
Machine: Dell Latitude CPx J Processor: Pentium III 650 Mhz Memory: 256 MB Root Device: IDE 12 GB Root Size/partition table:
Name Flags Part Type FS Type [Label] Size (MB)
------------------------------------------------------------------------------
hda1 Boot Primary Linux ext3 [/] 11556.52
hda5 Logical Linux swap 509.97
Output of lspci and lspci -n:
aerodactyl:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
0000:00:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
0000:00:08.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
aerodactyl:~# lspci -n 0000:00:00.0 0600: 8086:7190 (rev 03) 0000:00:01.0 0604: 8086:7191 (rev 03) 0000:00:03.0 0607: 104c:ac1c (rev 01) 0000:00:03.1 0607: 104c:ac1c (rev 01) 0000:00:07.0 0680: 8086:7110 (rev 02) 0000:00:07.1 0101: 8086:7111 (rev 01) 0000:00:07.2 0c03: 8086:7112 (rev 01) 0000:00:07.3 0680: 8086:7113 (rev 03) 0000:00:08.0 0401: 125d:1998 (rev 10) 0000:01:00.0 0300: 1002:4c4d (rev 64)
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O]
Comments/Problems:
I tried the beta 4 CD on this laptop and it did not detect all the hardware, so I was not able to do a net install (I forgot to send in the install-report), but this time everything worked great. The Debian Installer had come a long way, and I really like now. At work I install Debian frequently and it is a chore, now I just have to get them to switch to Sarge :)
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
