Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso> downloaded the 20041006 uname -a: Linux vuelta 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT 2004 i686 GNU/Linux Date: 20041011 Method: Boot from a cdrom burned from the iso dowloaded. The network installation started by itself. Not proxied.
Machine: i686 -- assembled. Processor: Motherboard LVMM3 Duron Pro 3000A+ Memory: 512 Root Device: IDE Root Size/partition table: Disk /dev/hda: 40.0 GB, 40020664320 bytes 16 heads, 63 sectors/track, 77545 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hda1 1 30473 15358108+ 7 HPFS/NTFS /dev/hda2 30474 32410 976248 82 Linux swap /dev/hda3 * 32411 47911 7812504 83 Linux /dev/hda4 47912 77545 14935536 83 Linux Output of lspci and lspci -n: ~$ lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 0000:01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] ~$ lspci -n 0000:00:00.0 0600: 1106:3116 0000:00:01.0 0604: 1106:b091 0000:00:10.0 0c03: 1106:3038 (rev 80) 0000:00:10.1 0c03: 1106:3038 (rev 80) 0000:00:10.2 0c03: 1106:3038 (rev 80) 0000:00:10.3 0c03: 1106:3104 (rev 82) 0000:00:11.0 0601: 1106:3177 0000:00:11.1 0101: 1106:0571 (rev 06) 0000:00:11.5 0401: 1106:3059 (rev 50) 0000:00:12.0 0200: 1106:3065 (rev 74) 0000:01:00.0 0300: 5333:8d04 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Very nice session. Thanks for the great job. The only problem I met is related to xfree. The xdebconfigurator finds a VIDEO CARD: S3 ProSavage DDR-K and declares the driver is savage. But once configuring xfree with debconf, it only works if I select vesa, instead of savage. Cheers, -- S�bastien -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
