Package: installation-reports Debian-installer-version: 20041015, sarge mini-cd uname -a: Linux paq 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i586 GNU/Linux (after kernel upgrade) Date: 2004-10-16 Method: boot from mini-cd, nw-install from http://ftp.univie.ac.at, proxy
Machine: Compaq Armada 7790DT Processor: Mobile Pentium MMX 233 MHz Memory: 64MB Root Device: 5GB IBM IDE Root Size/partition table: /dev/hda1 219608 93574 114318 46% / tmpfs 31124 0 31124 0% /dev/shm /dev/hda9 1776452 32840 1743612 2% /home /dev/hda8 134577 4129 123268 4% /tmp /dev/hda5 1836928 528564 1308364 29% /usr /dev/hda6 823968 130876 693092 16% /var /, /tmp are ext3, /home, /usr, /var are reiserfs Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Compaq Computer Corporation NorthStar CPU to PCI Bridge (rev 01) 0000:00:0c.0 CardBus bridge: Texas Instruments PCI1131 (rev 01) 0000:00:0c.1 CardBus bridge: Texas Instruments PCI1131 (rev 01) 0000:00:0d.0 VGA compatible controller: S3 Inc. 86cM65 [Aurora64V+] (rev 43) 0000:00:0e.0 ISA bridge: Compaq Computer Corporation MIS-L (rev 04) 0000:00:0e.1 IDE interface: Compaq Computer Corporation Triflex Dual EIDE Controller (rev 03) 0000:05:00.0 Ethernet controller: Linksys 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 11) 0000:00:00.0 0600: 0e11:ae6d (rev 01) 0000:00:0c.0 0607: 104c:ac15 (rev 01) 0000:00:0c.1 0607: 104c:ac15 (rev 01) 0000:00:0d.0 0300: 5333:8812 (rev 43) 0000:00:0e.0 0601: 0e11:ae29 (rev 04) 0000:00:0e.1 0101: 0e11:ae33 (rev 03) 0000:05:00.0 0200: 1317:1985 (rev 11) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: worked flawlessly, 2 thumbs up & thanks a lot sers Robert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
