On Sat, 2 Oct 2004 11:55:20 -0400, Joey Hess <[EMAIL PROTECTED]> wrote: > Panquekas wrote: > > It says: > > "Linux Kernel modules needed to drive some of your hardware are not > > available yet. Simply proceeding with the install may make these > > modules available later. > > > > the unvailable modules, and the devices that need them are: i810-tco > > (Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Bridge), e100 (Intel > > Corporation 82562EZ 10/100 Ethernet Controller), ide-mod (Linux IDE > > driver), ide-probe-mod (Linux IDE probe driver), ide-detect (Linux IDE > > detection), ide-floppy (Linux IDE floppy)" > > This warning message has nothing to do with your problem. > > > And I can't use my hard drive :\ it's not a good thing.. because I use > > debian more then an year and I never had problem's! Just in the > > beginning in the old installer! but it was user problem not the distro > > Perhaps if you tell us what SATA controller you have and provide lspci > and lspci -n output for your system we can see why it's not loading the > module. > > -- > see shy jo > > I think it is because if I don't have the module to my controller I don't have access to my drive so I can't install.. but here it is the lspci and lspci -n:
$ lspci 0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) 0000:00:06.0 System peripheral: Intel Corp. 82875P Processor to I/O Memory Interface (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 NJ [Radeon 9800 XT] 0000:01:00.1 Display controller: ATI Technologies Inc RV350 NJ [Radeon 9800 XT] (Secondary) 0000:02:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 0000:02:01.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04) 0000:02:01.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) 0000:02:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev 02) $ lspci -n 0000:00:00.0 0600: 8086:2578 (rev 02) 0000:00:01.0 0604: 8086:2579 (rev 02) 0000:00:06.0 0880: 8086:257e (rev 02) 0000:00:1d.0 0c03: 8086:24d2 (rev 02) 0000:00:1d.1 0c03: 8086:24d4 (rev 02) 0000:00:1d.2 0c03: 8086:24d7 (rev 02) 0000:00:1d.3 0c03: 8086:24de (rev 02) 0000:00:1d.7 0c03: 8086:24dd (rev 02) 0000:00:1e.0 0604: 8086:244e (rev c2) 0000:00:1f.0 0601: 8086:24d0 (rev 02) 0000:00:1f.1 0101: 8086:24db (rev 02) 0000:00:1f.2 0101: 8086:24d1 (rev 02) 0000:00:1f.3 0c05: 8086:24d3 (rev 02) 0000:01:00.0 0300: 1002:4e4a 0000:01:00.1 0380: 1002:4e6a 0000:02:01.0 0401: 1102:0004 (rev 04) 0000:02:01.1 0980: 1102:7003 (rev 04) 0000:02:01.2 0c00: 1102:4001 (rev 04) 0000:02:08.0 0200: 8086:1050 (rev 02) $ Oh and by the way I have an USB KeyBoard and in the installation I select USB KeyBoard and Portuguese KeyBoard we gives me and error: kbd-choose [1377]: Debug: mounting usbdevfs to look for kbd kbd-choose [1377]: Info: KeyBoard type at: present: false kbd-choose [1377]: Info: KeyBoard type usb: present: unkonwn kbd-choose [1377]: Info: Setting debian-installer/serial-console to false kbd-choose [1377]: Info: Setting debian-installer/uml-console to false kbd-choose [1377]: Info: choose_keymap: keymap = mac-usb-pt-latin1 kbd-choose [1377]: Info: kbd_chooser: setting keymap mac-usb-pt-latin1 main-menu [508]: (process 1375): Segmentation fault main-menu [508]: Warning **: Configuring `kbd-chooser` failed with error code 139 main-menu [508]: Warning **: menu item `kbd-chooser` failed init: ^MStarting pid 372, console /dev/vc/2: `/bin/sh` I think it's good to view this too.. Thnk for the help, Joey Hess! :) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
