Package: installation-reports Debian-installer-version: pre-rc2 (kernel 2.4.27) uname -a: Date: 3.10.2004 Method: businesscard_iso and netinst_iso
Machine: Sun Ultra 1 UPA/SBus Processor: UltraSPARC 167MHz Memory: 512MB Root Device: SCSI Root Size/partition table: Output of lspci and lspci -n: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Machine didn't boot. I see only: Starting system log daemon: syslogd, klogd. (proces:137): INFO: kbd-mode: setting console mode to unicode (UTF-8) Segfaultation fault Segfaultation fault Segfaultation fault .. .. On debug console I see: init: ^MStarting pid xxxx. console /dev/vc/1: '/sbin/debian-installer' init: ^MProcess 'sbin/debian-installer' (pid xxxx) exited. Scheduling it for restart. init: ^MStarting pid yyyy. console /dev/vc/1: '/sbin/debian-installer' init: ^MProcess 'sbin/debian-installer' (pid yyyy) exited. Scheduling it for restart. init: ^MStarting pid zzzz. console /dev/vc/1: '/sbin/debian-installer' ... ... With D-I rc1 (2.4.26) all work fine. Regards Milan Kocian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
