Package: installation-reports Debian-installer-version: 20/10/04 Sarge pre-rc2 uname -a: Linux jahdev 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT 2004 i686 GNU/Linux Date: 21/10/04 12H Method: Net Install without proxy, with official minimal CD
Machine: Patriot 2276 Processor: Celeron 850 Memory: 128MB Root Device: IDE hda1 Root Size/partition table: one partition /dev/hda1 10GB Output of lspci and lspci -n: # lspci 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11) 0000:00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)0000:00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) 0000:00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 80) 0000:00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 0000:00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 0000:00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 01) 0000:00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 0000:00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 0000:00:03.0 CardBus bridge: O2 Micro, Inc. OZ6812 Cardbus Controller (rev 05) 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 11) # lspci -n 0000:00:00.0 0600: 1039:0630 (rev 11) 0000:00:00.1 0101: 1039:5513 (rev d0) 0000:00:01.0 0601: 1039:0018 0000:00:01.1 0200: 1039:0900 (rev 80) 0000:00:01.2 0c03: 1039:7001 (rev 07) 0000:00:01.3 0c03: 1039:7001 (rev 07) 0000:00:01.4 0401: 1039:7018 (rev 01) 0000:00:01.6 0703: 1039:7013 (rev a0) 0000:00:02.0 0604: 1039:0001 0000:00:03.0 0607: 1217:6872 (rev 05) 0000:01:00.0 0300: 1039:6300 (rev 11) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [O] Comments/Problems: Problem with LILO. With this laptop, I need the vga=771 at boot. I put this before boot on CD, no problem. But when D-I install lilo, it put the vga=771 option in lilo.conf, but not at the right place... It put this in append="", and lilo make an error. For the vga option, there is directly a vga=normal in config, where you change normal by 771. I wish this will help you :) Ho, sorry for my very sad english :) -- Gregoire Compagnon <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
