Package: installation-reports INSTALL REPORT
Debian-installer-version: rc1, August 01 16:39 http://ftp.us.debian.org/debian/dists/testing/main/installer-i386/rc1/images/netboot/pxeboot.tar.gz uname -a: Linux headstrong 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i586 GNU/Linux Date: 21-November-2004 14:30 EST Method: How did you install? What did you boot off? If network install, from where? Proxied? pxeboot from already installed Debian testing system, no proxy, network install from http://ftp.us.debian.org Machine: Compaq Deskpro 4000s 5233MMX Processor: Pentium 233MMX Memory: 256MB Root Device: IDE Maxtor 51536U3 Root Size/partition table: root size 512MB major minor #blocks name 3 0 15007608 hda 3 1 15000048 hda1 (PV for LVM) 3 3 7528 hda3 (Compaq Diagnostics partiton) 254 0 512000 dm-0 (/) 254 1 3145728 dm-1 (/usr) 254 2 5242880 dm-2 (/var) 254 3 4194304 dm-3 (/home) 254 4 860160 dm-4 (swap) 254 5 1044480 dm-5 (/tmp) Output of lspci and lspci -n: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C595/97 [Apollo VP2/97] (rev 06) 0000:00:0f.0 VGA compatible controller: S3 Inc. 86c775/86c785 [Trio 64V2/DX or /GX] (rev 16) 0000:00:10.0 Network controller: Compaq Computer Corporation Netelligent 10/100 TX Embedded UTP (rev 10) 0000:00:14.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 41) 0000:00:14.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:14.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 02) 0000:00:14.3 Non-VGA unclassified device: VIA Technologies, Inc. VT82C586B ACPI (rev 10) 0000:00:00.0 0600: 1106:1595 (rev 06) 0000:00:0f.0 0300: 5333:8901 (rev 16) 0000:00:10.0 0280: 0e11:b011 (rev 10) 0000:00:14.0 0601: 1106:0586 (rev 41) 0000:00:14.1 0101: 1106:0571 (rev 06) 0000:00:14.2 0c03: 1106:3038 (rev 02) 0000:00:14.3 0000: 1106:3040 (rev 10) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Maybe I'm not understanding the point of pxebooting, but the initrd included in pxeboot.tar.gz doesn't include any ide or lvm modules. I downloaded kernel-image-2.6.7-1-386_2.6.7-2_i386.deb from the archive, unpacked it, and copied over ide-core.ko, ide-disk.ko, ide-generic.ko, ide-pnp.ko, and all of the md directory. I was really using this install to teach myself how to set up pxe. The install itself went very smoothly. Thank you for the effort put into this high-quality system! Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
