Bug#393728: dm-crypt on raid does not play nicely

[David Härdeman]

On Tue, Oct 17, 2006 at 05:35:24PM +0200, Miroslav Kure wrote:
The installation then proceeded like usual, but after the reboot to
the real system
 Begin: Loading MD modules ...
 md: driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
 md: bitmap version 4.39
 md: raid1 personality registered for level 1
 Success: loaded module raid1.
 Done.
 Begin: Assembling all MD arrays ...
 md: md0 stopped.
 md: bind<hdb2>
 md: bind<hda2>
 raid1: raid set md0 active with 2 out of 2 mirrors
 mdadm: /dev/md0 has been started with 2 drives.
 Success: assembled all arrays.
 No cryptoroot configured, skipping
 Done.
 Begin: Waiting for root file system... ...
 _

The boot was stuck at that point, but after a while it continued:

 Done.
        Check root= bootarg cat /proc/cmdline
         or mirring modules, devices: cat /proc/modules ls /dev
 ALERT! /dev/mapper/md0_crypt does not exist. Dropping to a shell!

Could you post the contents of /conf/conf.d/cryptroot in the initramfs 
image? (boot with the "break" argument and you'll be dropped into a 
shell so you can inspect the contents of the initramfs image).

--
David Härdeman