Hi All I built a local copy of the netboot installer (svn revision 50226, and KERNELVERSION = 2.6.22-3) for arm/ixp4xx last night and I get the following message repeated over and over:
/build/buildd/cdebconf-0.125/src/debconf.c:135 (main): Cannot initialize debconf template database Below is the boot log from an NSLU2 (arm/ixp4xx). Is this a known problem? Thanks. Gordon Ethernet eth0: MAC address 00:14:bf:71:02:d7 IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1 Default server: 0.0.0.0, DNS server IP: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004 Platform: IXDP425 Development Platform (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each. == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> boot;exec 0x01d00000 have eRcOmM copy kernel code from flash to RAM copy ramdisk file from flash to RAM run kernel Using base address 0x01d00000 and length 0x0001ffe0 APEX Boot Loader 1.4.15 -- Copyright (c) 2004,2005,2006,2007 Marc Singer APEX comes with ABSOLUTELY NO WARRANTY. It is free software and you are welcome to redistribute it under certain circumstances. For details, refer to the file COPYING in the program source. apex => mem:0x00200000+0xa78c (42892 bytes) env => nor:0x7c000+15k (no-write) Use the command 'help help' to get started. # copy -s $kernelsrc $bootaddr # copy -s fis://kernel 0x00008000 1441760 bytes transferred # copy -s $ramdisksrc $ramdiskaddr # copy -s fis://ramdisk 0x01000000 6291440 bytes transferred # wait 10 Type ^C key to cancel autoboot. Type ^C key to cancel autoboot. # boot ATAG_HEADER ATAG_MEM: start 0x00000000 size 0x02000000 ATAG_CMDLINE: (55 bytes) 'console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug' ATAG_INITRD2: start 0x01000000 size 0x00400000 ATAG_END Booting kernel at 0x00008000... Uncompressing Linux.................................................................................... done, booting the kernel. Linux version 2.6.22-3-ixp4xx (Debian 2.6.22-6) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070831 (prerelease) (Debian 4.1.2-16)) #1 Tue Nov 13 02:17:20 UTC 2007 CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f Machine: Linksys NSLU2 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Built 1 zonelists. Total pages: 8128 Kernel command line: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug IRQ lockup detection disabled PID hash table entries: 128 (order: 7, 512 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 32MB = 32MB total Memory: 25660KB available (2360K code, 220K data, 100K init) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 IXP4xx: Using 16MiB expansion bus window size PCI: IXP4xx is host PCI: IXP4xx Using direct access for memory space PCI: bus0: Fast back to back transfers disabled dmabounce: registered device 0000:00:01.0 on pci bus dmabounce: registered device 0000:00:01.1 on pci bus dmabounce: registered device 0000:00:01.2 on pci bus NET: Registered protocol family 2 Time: OSTS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 4096K NetWinder Floating Point Emulator V0.97 (double precision) audit: initializing netlink socket (disabled) audit(4.629:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) �(c) 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) IXP4xx Watchdog Timer: heartbeat 60 sec Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000 6 RedBoot partitions found on MTD device IXP4XX-Flash.0 Creating 6 MTD partitions on "IXP4XX-Flash.0": 0x00000000-0x00040000 : "RedBoot" NSLU2 MAC: 00:14:bf:71:02:d7 0x00040000-0x00060000 : "SysConf" 0x00060000-0x00080000 : "Loader" 0x00080000-0x001e0000 : "Kernel" 0x001e0000-0x007e0000 : "Ramdisk" 0x007e0000-0x00800000 : "FIS directory" mice: PS/2 mouse device common for all mice i2c /dev entries driver x1205 0-006f: chip found, driver version 1.0.7 x1205 0-006f: rtc core: registered x1205 as rtc0 i2c-gpio i2c-gpio.0: using pins 7 (SDA) and 6 (SCL) Registered led device: ready Registered led device: status Registered led device: disk-1 Registered led device: disk-2 NET: Registered protocol family 26 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 XScale DSP coprocessor detected. x1205 0-006f: setting the system clock to 2007-11-24 07:03:36 (1195887816) Freeing init memory: 100K /build/buildd/cdebconf-0.125/src/debconf.c:135 (main): Cannot initialize debconf template database -- Gordon Farquharson GnuPG Key ID: 32D6D676
