Your message dated Sat, 18 Jul 2009 00:43:05 +0200
with message-id <[email protected]>
and subject line Re: RTC device works on Thinkpad T61 with 2.6.29
has caused the Debian Bug report #431648,
regarding RTC device not working on ThinkPad T61
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
431648: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=431648
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-2.6.21-2-686
Version: 2.6.21-5
Severity: normal
Hello,
It seems the the real-time clock device [/dev/rtc] does not work on my
ThinkPad T61:
j...@wakko:~$ sudo hwclock --show
select() to /dev/rtc to wait for clock tick timed out
I am currently working around this problem by using --directisa. For
example, I have added the line "HWCLOCKPARS=--directisa" to
/etc/default/rcS.
Let me know if there's any additional info you need.
Thanks,
--Joe
-- Package-specific info:
** Version: Linux version 2.6.21-2-686 (Debian 2.6.21-5) ([email protected])
(gcc version 4.1.3 20070601 (prerelease) (Debian 4.1.2-12)) #1 SMP Mon Jun 25
20:53:36 UTC 2007
** Not tainted
** Kernel log:
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 524280k swap on /dev/mapper/diskvg-swap. Priority:-1 extents:1
across:524280k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (off-line)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Non-volatile memory driver v1.2
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ata1.00: exception Emask 0x2 SAct 0x7000007f SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x7000007f
FIS=005040a1:08000000)
ata1.00: cmd 61/08:00:a3:08:ab/00:00:0f:00:00/40 tag 0 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:08:cb:45:ab/00:00:0f:00:00/40 tag 1 cdb 0x0 data 8192 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:10:eb:45:ab/00:00:0f:00:00/40 tag 2 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:18:43:46:ab/00:00:0f:00:00/40 tag 3 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:20:e3:46:ab/00:00:0f:00:00/40 tag 4 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:28:cb:45:03/00:00:10:00:00/40 tag 5 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:30:db:45:03/00:00:10:00:00/40 tag 6 cdb 0x0 data 8192 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:e0:5b:08:ab/00:00:0f:00:00/40 tag 28 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:e8:7b:08:ab/00:00:0f:00:00/40 tag 29 cdb 0x0 data 8192 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:f0:93:08:ab/00:00:0f:00:00/40 tag 30 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ata1.00: exception Emask 0x2 SAct 0x9210000 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x9210000
FIS=005040a1:00020000)
ata1.00: cmd 61/08:80:93:53:66/00:00:0f:00:00/40 tag 16 cdb 0x0 data 4096 out
res 50/00:08:03:56:66/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:a8:b3:55:66/00:00:0f:00:00/40 tag 21 cdb 0x0 data 4096 out
res 50/00:08:03:56:66/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:c0:d3:55:66/00:00:0f:00:00/40 tag 24 cdb 0x0 data 4096 out
res 50/00:08:03:56:66/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:d8:03:56:66/00:00:0f:00:00/40 tag 27 cdb 0x0 data 4096 out
res 50/00:08:03:56:66/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
** Loaded modules:
Module Size Used by
binfmt_misc 10984 1
rfcomm 35480 0
l2cap 22208 5 rfcomm
bluetooth 48676 4 rfcomm,l2cap
nvram 8488 0
uinput 8768 0
button 7952 0
ac 5220 0
battery 10020 0
ipv6 236256 12
acpi_cpufreq 8680 1
cpufreq_ondemand 7884 1
cpufreq_powersave 1792 0
cpufreq_conservative 6888 0
cpufreq_userspace 4128 0
cpufreq_stats 5120 0
freq_table 4512 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
sbp2 21188 0
loop 15880 0
tsdev 7520 0
snd_hda_intel 20312 0
serio_raw 6564 0
pcmcia 35276 0
firmware_class 9408 1 pcmcia
snd_hda_codec 198336 1 snd_hda_intel
psmouse 34952 0
intel_agp 23004 1
snd_pcm_oss 39168 0
snd_mixer_oss 15328 1 snd_pcm_oss
agpgart 32168 1 intel_agp
yenta_socket 24876 1
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic
rtc 12760 0
pcspkr 3136 0
snd_pcm 71940 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 20868 1 snd_pcm
i2c_i801 8560 0
i2c_core 20480 1 i2c_i801
snd 48132 6
snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7424 1 snd
snd_page_alloc 9512 2 snd_hda_intel,snd_pcm
evdev 9216 4
eth1394 18276 0
ext3 120904 7
jbd 55208 1 ext3
mbcache 8164 1 ext3
dm_mirror 20116 0
dm_snapshot 16420 0
dm_mod 52556 17 dm_mirror,dm_snapshot
ide_cd 36512 0
cdrom 32768 1 ide_cd
sd_mod 19904 3
piix 9508 0 [permanent]
generic 4804 0 [permanent]
ide_core 115016 3 ide_cd,piix,generic
ahci 20068 2
ata_generic 8100 0
libata 109172 2 ahci,ata_generic
scsi_mod 133740 3 sbp2,sd_mod,libata
ohci1394 32432 0
ieee1394 89560 3 sbp2,eth1394,ohci1394
e1000 113408 0
ehci_hcd 30796 0
uhci_hcd 22608 0
usbcore 123272 3 ehci_hcd,uhci_hcd
thermal 14120 0
processor 30888 2 acpi_cpufreq,thermal
fan 4868 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile Memory Controller Hub
[8086:2a00] (rev 0c)
Subsystem: Lenovo Unknown device [17aa:20b3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile Integrated
Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA])
Subsystem: Lenovo Unknown device [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile Integrated Graphics
Controller [8086:2a03] (rev 0c)
Subsystem: Lenovo Unknown device [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at f8200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network
Connection [8086:1049] (rev 03)
Subsystem: Lenovo Unknown device [17aa:20b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 217
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe025000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1860 [size=32]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1880 [size=32]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
#2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Unknown device [17aa:20ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe226c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 03)
Subsystem: Lenovo Unknown device [17aa:20ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dc000000-df3fffff
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: 00000000df800000-00000000df8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d0000000-d1ffffff
Prefetchable memory behind bridge: 00000000df500000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 18a0 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 18c0 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18e0 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
#1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Unknown device [17aa:20ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00007000-0000afff
Memory behind bridge: f8300000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile LPC Interface Controller
[8086:2811] (rev 03)
Subsystem: Lenovo Unknown device [17aa:20b6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation Mobile IDE Controller
[8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Unknown device [17aa:20a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1c00 [size=16]
00:1f.2 SATA controller [0106]: Intel Corporation Mobile SATA AHCI Controller
[8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Unknown device [17aa:20a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 218
Region 0: I/O ports at 1c50 [size=8]
Region 1: I/O ports at 1c44 [size=4]
Region 2: I/O ports at 1c48 [size=8]
Region 3: I/O ports at 1c40 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fe226000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 03)
Subsystem: Lenovo Unknown device [17aa:20a9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe227400 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
03:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5212
802.11abg NIC [168c:1014] (rev 01)
Subsystem: IBM ThinkPad 11a/b/g Wireless LAN Mini Express Adapter
(AR5BXB6) [1014:058a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at df3f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Lenovo Unknown device [17aa:20c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f8300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f4000000-f7fff000 (prefetchable)
Memory window 1: 80000000-83fff000
I/O window 0: 00007000-000070ff
I/O window 1: 00007400-000074ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd Unknown device [1180:0832]
(rev 04) (prog-if 10 [OHCI])
Subsystem: Lenovo Unknown device [17aa:20c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at f8301000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.21-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.21-2-686 depends on:
ii initramfs-tools [linux-initr 0.88 tools for generating an initramfs
ii module-init-tools 3.3-pre11-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.21-2-686 recommends:
ii libc6-i686 2.5-11 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686:
linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false
linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686:
linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false
linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686:
--- End Message ---
--- Begin Message ---
Version: 2.6.29-1
On Tue, Apr 07, 2009 at 04:45:07AM +0000, Joseph Nahmias wrote:
> Hi,
>
> Just wanted to let you know that this bugs no longer affects me now that
> I'm running 2.6.29:
>
> $ uname -a
> Linux wakko 2.6.29-1-686 #1 SMP Tue Mar 24 23:05:52 UTC 2009 i686 GNU/Linux
> $ sudo hwclock --show
> Tue 07 Apr 2009 12:42:11 AM EDT -0.359900 seconds
> $ dpkg -l linux-image-2.6.29-1-686 | grep ^.i
> ii linux-image-2.6.29-1-686 2.6.29-1 Linux 2.6.29 image on
> PPro/Celeron/PII/PIII/P4
>
>
> It may have been fixed earlier (eg. in 2.6.28) but I haven't checked.
Thanks, marking 2.6.29 as closed, then.
Cheers,
Moritz
--- End Message ---
