Your message dated Thu, 12 Dec 2019 13:25:10 +0100
with message-id <[email protected]>
and subject line Re: irqbalance silently dies [2.6.25.7] / Debian (testing) /
kernel or irqbalance issue?
has caused the Debian Bug report #487383,
regarding irqbalance silently dies [2.6.25.7] / Debian (testing) / kernel or
irqbalance issue?
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
487383: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487383
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: irqbalance
Version: 0.55-2.1
Architecture: x86 (not using 64bit)
CPU: E6700
Debian: Testing (Lenny)
CC'd LKML for ideas as well incase this is a kernel issue, please remove
[email protected] if you reply to this/me, thank you.
My .config is attached (I am running kernel 2.6.25.7)
Problem: I run IRQ balance at boot and I do not use --one-shot and it silently
dies like the problem this person reported here:
http://www.mail-archive.com/[email protected]/msg111221.html
I also run irqbalance on two other hosts and it has no problem on them, but
those are 64bit machines w/64bit Debian (amd64+64bit kernel).
$ cat /etc/default/irqbalance
#Configuration for the irqbalance daemon
#Should irqbalance be enabled?
ENABLED=1
#Balance the IRQs only once?
ONESHOT="0"
If I manually start it up (after it has died, it runs for a while (minutes)
and then it dies again.
What is the root cause of this bug?
Justin.
config-2.6.25.7.bz2
Description: Binary data
--- End Message ---
--- Begin Message ---
Closing the bug as invalid.
Setting the ONESHOT variable to anything (included the empty string)
causes irqbalance to run in oneshot mode. The variable has a different
name in the newer versions of the package, but the logic is the same.
Paride
On Sat, 21 Jun 2008 08:07:32 -0400 (EDT) Justin Piszcz
<[email protected]> wrote:
> Package: irqbalance
> Version: 0.55-2.1
> Architecture: x86 (not using 64bit)
> CPU: E6700
> Debian: Testing (Lenny)
>
> CC'd LKML for ideas as well incase this is a kernel issue, please remove
> [email protected] if you reply to this/me, thank you.
>
> My .config is attached (I am running kernel 2.6.25.7)
>
> Problem: I run IRQ balance at boot and I do not use --one-shot and it silently
> dies like the problem this person reported here:
> http://www.mail-archive.com/[email protected]/msg111221.html
>
> I also run irqbalance on two other hosts and it has no problem on them, but
> those are 64bit machines w/64bit Debian (amd64+64bit kernel).
>
> $ cat /etc/default/irqbalance
> #Configuration for the irqbalance daemon
>
> #Should irqbalance be enabled?
> ENABLED=1
> #Balance the IRQs only once?
> ONESHOT="0"
>
> If I manually start it up (after it has died, it runs for a while (minutes)
> and then it dies again.
>
> What is the root cause of this bug?
>
> Justin.
--- End Message ---
