Hi, I ordered a SanDisk Ultra 32GB SDHC microSD card w/ adapter today, will report back if it works once it arrives.
Thanks, Markus > On 26.07.2015, at 11:58, Karsten Merker <[email protected]> wrote: > > On Sat, Jul 25, 2015 at 05:33:14PM +0000, Markus Kasten wrote: > >> Package: u-boot-sunxi >> Version: 2014.10-2015.04 (stable/testing/unstable) >> Severity: important >> Tags: d-i upstream >> >> Dear Maintainer, >> >> I was trying to use the debian installer SD-card netboot image >> to install a fresh copy of debian on my Banana Pi (the ones from >> http://ftp2.de.debian.org/debian/dists/<stability>/main/installer-armhf/current/images/netboot/SD-card-images/). >> >> The image boots the u-boot bootloader properly, but fails to >> load vmlinuz off my sdcard. Loading and booting the installer >> via tftp works without problems. The same thing happens after >> installing debian: u-boot boots up properly, but fails to load >> the kernel (ext2 instead of fat this time). Listing files on >> the sdcard with fatls/ext2ls gives me the correct list of files >> without error. >> >> >> Here is the output of u-boot with the netboot image: >> >> U-Boot 2014.10+dfsg1-5 (Apr 07 2015 - 22:00:53) Allwinner Technology > [...] >> Found U-Boot script /boot.scr >> reading /boot.scr >> 1451 bytes read in 44 ms (31.3 KiB/s) >> ## Executing script at 43100000 >> Mainline u-boot / new-style environment detected. >> reading vmlinuz >> Error reading cluster >> ** Unable to read file vmlinuz ** >> SCRIPT FAILED: continuing... >> ** Can't read partition table on 0:0 ** >> ** Invalid partition 1 ** >> >> >> Output after installing debian, booting the installation: > [...] >> Found U-Boot script /boot.scr >> 2120 bytes read in 78 ms (26.4 KiB/s) >> ## Executing script at 43100000 >> Mainline u-boot / new-style environment detected. >> ** ext4fs_devread read error - block >> SCRIPT FAILED: continuing... >> >> >> I tried this with a couple of different cards: >> * SanDisk Ultra II 2GB: does not work >> * SanDisk Ultra II 2GB (another one): does not work >> * SanDisk Ultra II 1GB: does not work >> >> I also pulled the images off the card again to check the >> md5sum, it's correct. >> >> This applies to stable, testing and unstable (from 25.07.2015) >> images. >> >> Interestingly, it works with an SanDisk Extreme 16GB SDHC card, >> so this might be a timing issue (as suggested in IRC). I >> currently don't have any other cards laying around to test this >> with, so I can't provide info on other cards and manufacturers. > > Hello, > > I cannot reproduce the problem here, but looking at which cards > work and which cards do not work for you makes me wonder whether > this might be an issue of SD vs. SDHC. All cards that do not > work for you are "classic" SD cards while the one that works for > you is an SDHC one. > > I have only SDHC cards (which work for me without problems) and > no "classic" SD cards, so I unfortunately cannot test the latter. > Do you perhaps have the chance to try another SDHC card? > > HTH, > Karsten > -- > Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung > sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der > Werbung sowie der Markt- oder Meinungsforschung.
