Hi, so yes, I tested two more SDHC cards today and they all work. Seems to be a problem with standard SD 1.x cards, probably <= 2GB.
Greetings, Markus > On 26.07.2015, at 16:53, Markus Kasten <[email protected]> wrote: > > Hi, > > I ordered a SanDisk Ultra 32GB SDHC microSD card w/ adapter today, will > report back if it works once it arrives. > > Thanks, > Markus > >> On 26.07.2015, at 11:58, Karsten Merker <[email protected]> wrote: >> >> On Sat, Jul 25, 2015 at 05:33:14PM +0000, Markus Kasten wrote: >> >>> Package: u-boot-sunxi >>> Version: 2014.10-2015.04 (stable/testing/unstable) >>> Severity: important >>> Tags: d-i upstream >>> >>> Dear Maintainer, >>> >>> I was trying to use the debian installer SD-card netboot image >>> to install a fresh copy of debian on my Banana Pi (the ones from >>> http://ftp2.de.debian.org/debian/dists/<stability>/main/installer-armhf/current/images/netboot/SD-card-images/). >>> The image boots the u-boot bootloader properly, but fails to >>> load vmlinuz off my sdcard. Loading and booting the installer >>> via tftp works without problems. The same thing happens after >>> installing debian: u-boot boots up properly, but fails to load >>> the kernel (ext2 instead of fat this time). Listing files on >>> the sdcard with fatls/ext2ls gives me the correct list of files >>> without error. >>> >>> >>> Here is the output of u-boot with the netboot image: >>> >>> U-Boot 2014.10+dfsg1-5 (Apr 07 2015 - 22:00:53) Allwinner Technology >> [...] >>> Found U-Boot script /boot.scr >>> reading /boot.scr >>> 1451 bytes read in 44 ms (31.3 KiB/s) >>> ## Executing script at 43100000 >>> Mainline u-boot / new-style environment detected. >>> reading vmlinuz >>> Error reading cluster >>> ** Unable to read file vmlinuz ** >>> SCRIPT FAILED: continuing... >>> ** Can't read partition table on 0:0 ** >>> ** Invalid partition 1 ** >>> >>> >>> Output after installing debian, booting the installation: >> [...] >>> Found U-Boot script /boot.scr >>> 2120 bytes read in 78 ms (26.4 KiB/s) >>> ## Executing script at 43100000 >>> Mainline u-boot / new-style environment detected. >>> ** ext4fs_devread read error - block >>> SCRIPT FAILED: continuing... >>> >>> >>> I tried this with a couple of different cards: >>> * SanDisk Ultra II 2GB: does not work >>> * SanDisk Ultra II 2GB (another one): does not work >>> * SanDisk Ultra II 1GB: does not work >>> >>> I also pulled the images off the card again to check the >>> md5sum, it's correct. >>> >>> This applies to stable, testing and unstable (from 25.07.2015) >>> images. >>> >>> Interestingly, it works with an SanDisk Extreme 16GB SDHC card, >>> so this might be a timing issue (as suggested in IRC). I >>> currently don't have any other cards laying around to test this >>> with, so I can't provide info on other cards and manufacturers. >> >> Hello, >> >> I cannot reproduce the problem here, but looking at which cards >> work and which cards do not work for you makes me wonder whether >> this might be an issue of SD vs. SDHC. All cards that do not >> work for you are "classic" SD cards while the one that works for >> you is an SDHC one. >> >> I have only SDHC cards (which work for me without problems) and >> no "classic" SD cards, so I unfortunately cannot test the latter. >> Do you perhaps have the chance to try another SDHC card? >> >> HTH, >> Karsten >> -- >> Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung >> sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der >> Werbung sowie der Markt- oder Meinungsforschung. >
signature.asc
Description: Message signed with OpenPGP using GPGMail
