Package: pulseaudio Version: 9.0-1.1 Severity: normal When I connect a usb audio device, pulseaudio does not notice that I connected it. I need to restart pulseaudio first, with "pulseaudio -k". Then it works without problems. But after pluging it out and in again, it is necesary to restart pulseaudio again.
here dmesg, if it helps... [11538.301243] usb 1-2: USB disconnect, device number 7 [11549.333371] usb 1-2: new full-speed USB device number 8 using xhci_hcd [11549.464521] usb 1-2: New USB device found, idVendor=24ae, idProduct=6000 [11549.464525] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [11549.464526] usb 1-2: Product: Rapoo Wireless Audio [11549.464528] usb 1-2: Manufacturer: Rapoo [11549.469950] input: Rapoo Rapoo Wireless Audio as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:24AE:6000.0009/input/input19 [11549.526033] hid-generic 0003:24AE:6000.0009: input,hidraw3: USB HID v1.00 Device [Rapoo Rapoo Wireless Audio] on usb-0000:00:14.0-2/input3 -- Package-specific info: File '/etc/default/pulseaudio' does not exist -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages pulseaudio depends on: ii adduser 3.115 ii libasound2 1.1.1-2 ii libasound2-plugins 1.1.1-1 ii libc6 2.23-2 ii libcap2 1:2.25-1 ii libdbus-1-3 1.10.8-1 ii libfftw3-single3 3.3.4-2+b1 ii libgcc1 1:6.1.1-9 ii libice6 2:1.0.9-1+b1 ii libltdl7 2.4.6-0.1 ii liborc-0.4-0 1:0.4.25-1 ii libpulse0 9.0-1.1 ii libsm6 2:1.2.2-1+b1 ii libsndfile1 1.0.25-10 ii libsoxr0 0.1.2-1 ii libspeexdsp1 1.2~rc1.2-1 ii libstdc++6 6.1.1-9 ii libsystemd0 230-7 ii libtdb1 1.3.9-1 ii libudev1 230-7 ii libwebrtc-audio-processing1 0.3-1 ii libx11-6 2:1.6.3-1 ii libx11-xcb1 2:1.6.3-1 ii libxcb1 1.11.1-1 ii libxtst6 2:1.2.2-1+b1 ii lsb-base 9.20160629 ii pulseaudio-utils 9.0-1.1 Versions of packages pulseaudio recommends: pn pulseaudio-module-udev <none> pn pulseaudio-module-x11 <none> ii rtkit 0.11-4 Versions of packages pulseaudio suggests: ii paman 0.9.4-1+b2 pn paprefs <none> ii pavucontrol 3.0-3+b2 pn pavumeter <none> -- no debconf information
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 ; resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no ; lfe-crossover-freq = 0 ; flat-volumes = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 200000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply ### Make some devices default #set-default-sink output #set-default-source input
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started in system # mode. ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Automatically restore the volume of streams and devices load-module module-stream-restore load-module module-device-restore ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### Enable positioned event sounds load-module module-position-event-sounds
default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) sysdefault:CARD=PCH HDA Intel PCH, ALC269VC Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog Front speakers surround21:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC269VC Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions sysdefault:CARD=Audio Rapoo Wireless Audio, USB Audio Default Audio Device front:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio Front speakers surround21:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio Direct sample mixing device dsnoop:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio Direct sample snooping device hw:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio Direct hardware device without any conversions plughw:CARD=Audio,DEV=0 Rapoo Wireless Audio, USB Audio Hardware device with all software conversions
Module #0 Name: module-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "9.0" Module #1 Name: module-stream-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "9.0" Module #2 Name: module-card-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "9.0" Module #3 Name: module-augment-properties Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "9.0" Module #4 Name: module-switch-on-port-available Argument: Usage counter: n/a Properties: Module #6 Name: module-alsa-sink Argument: device_id=0 Usage counter: 1 Properties: module.author = "Lennart Poettering" module.description = "ALSA Sink" module.version = "9.0" Module #7 Name: module-alsa-source Argument: device_id=0 Usage counter: 1 Properties: module.author = "Lennart Poettering" module.description = "ALSA Source" module.version = "9.0" Module #8 Name: module-alsa-sink Argument: device_id=1 Usage counter: 3 Properties: module.author = "Lennart Poettering" module.description = "ALSA Sink" module.version = "9.0" Module #9 Name: module-alsa-source Argument: device_id=1 Usage counter: 1 Properties: module.author = "Lennart Poettering" module.description = "ALSA Source" module.version = "9.0" Module #10 Name: module-bluetooth-policy Argument: Usage counter: n/a Properties: module.author = "Frédéric Dalleau" module.description = "When a bluetooth sink or source is added, load module-loopback" module.version = "9.0" Module #11 Name: module-bluetooth-discover Argument: Usage counter: n/a Properties: module.author = "João Paulo Rechi Vita" module.description = "Detect available Bluetooth daemon and load the corresponding discovery module" module.version = "9.0" Module #12 Name: module-bluez5-discover Argument: Usage counter: n/a Properties: module.author = "João Paulo Rechi Vita" module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers" module.version = "9.0" Module #13 Name: module-native-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "9.0" Module #14 Name: module-default-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "9.0" Module #15 Name: module-rescue-streams Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move its streams to the default sink/source" module.version = "9.0" Module #16 Name: module-always-sink Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Always keeps at least one sink loaded even if it's a null one" module.version = "9.0" Module #17 Name: module-intended-roles Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based on intended roles of devices" module.version = "9.0" Module #18 Name: module-suspend-on-idle Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "9.0" Module #19 Name: module-console-kit Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each ConsoleKit session of this user" module.version = "9.0" Module #20 Name: module-systemd-login Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "9.0" Module #21 Name: module-position-event-sounds Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "9.0" Module #22 Name: module-role-cork Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "9.0" Module #23 Name: module-filter-heuristics Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "9.0" Module #24 Name: module-filter-apply Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "9.0" Sink #0 State: IDLE Name: alsa_output.0.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-sink.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 50221 / 77% / -6.94 dB, front-right: 50221 / 77% / -6.94 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.0.analog-stereo.monitor Latency: 32402 usec, configured 40000 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC269VC Analog" alsa.id = "ALC269VC Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xf0610000 irq 28" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "1e20" device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC269VC" alsa.components = "HDA:10ec0269,144dc0d7,00100202 HDA:80862806,80860101,00100000" device.icon_name = "audio-card-analog-pci" Formats: pcm Sink #1 State: RUNNING Name: alsa_output.1.analog-stereo Description: Rapoo Wireless Audio Analog Stereo Driver: module-alsa-sink.c Sample Specification: s16le 2ch 32000Hz Channel Map: front-left,front-right Owner Module: 8 Mute: no Volume: front-left: 93164 / 142% / 9.17 dB, front-right: 93164 / 142% / 9.17 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.1.analog-stereo.monitor Latency: 46767 usec, configured 40000 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "USB Audio" alsa.id = "USB Audio" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "1" alsa.card_name = "Rapoo Wireless Audio" alsa.long_card_name = "Rapoo Rapoo Wireless Audio at usb-0000:00:14.0-2, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0" sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1" udev.id = "usb-Rapoo_Rapoo_Wireless_Audio-00" device.bus = "usb" device.vendor.id = "24ae" device.vendor.name = "Rapoo" device.product.id = "6000" device.product.name = "Rapoo Wireless Audio" device.serial = "Rapoo_Rapoo_Wireless_Audio" device.string = "front:1" device.buffering.buffer_size = "256000" device.buffering.fragment_size = "128000" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Rapoo Wireless Audio Analog Stereo" alsa.mixer_name = "USB Mixer" alsa.components = "USB24ae:6000" device.icon_name = "audio-card-analog-usb" Formats: pcm Source #0 State: RUNNING Name: alsa_output.0.analog-stereo.monitor Description: Monitor of Built-in Audio Analog Stereo Driver: module-alsa-sink.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.0.analog-stereo Latency: 0 usec, configured 40000 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Built-in Audio Analog Stereo" device.class = "monitor" device.icon_name = "audio-input-microphone" Formats: pcm Source #1 State: RUNNING Name: alsa_input.0.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-source.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: n/a Latency: 712 usec, configured 40000 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC269VC Analog" alsa.id = "ALC269VC Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xf0610000 irq 28" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "1e20" device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC269VC" alsa.components = "HDA:10ec0269,144dc0d7,00100202 HDA:80862806,80860101,00100000" device.icon_name = "audio-input-microphone-analog-pci" Formats: pcm Source #2 State: RUNNING Name: alsa_output.1.analog-stereo.monitor Description: Monitor of Rapoo Wireless Audio Analog Stereo Driver: module-alsa-sink.c Sample Specification: s16le 2ch 32000Hz Channel Map: front-left,front-right Owner Module: 8 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.1.analog-stereo Latency: 0 usec, configured 40000 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Rapoo Wireless Audio Analog Stereo" device.class = "monitor" device.icon_name = "audio-input-microphone" Formats: pcm Source #3 State: RUNNING Name: alsa_input.1.analog-mono Description: Rapoo Wireless Audio Analog Mono Driver: module-alsa-source.c Sample Specification: s16le 1ch 48000Hz Channel Map: mono Owner Module: 9 Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: n/a Latency: 302 usec, configured 40000 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "USB Audio" alsa.id = "USB Audio" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "1" alsa.card_name = "Rapoo Wireless Audio" alsa.long_card_name = "Rapoo Rapoo Wireless Audio at usb-0000:00:14.0-2, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0" sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1" udev.id = "usb-Rapoo_Rapoo_Wireless_Audio-00" device.bus = "usb" device.vendor.id = "24ae" device.vendor.name = "Rapoo" device.product.id = "6000" device.product.name = "Rapoo Wireless Audio" device.serial = "Rapoo_Rapoo_Wireless_Audio" device.string = "hw:1" device.buffering.buffer_size = "192000" device.buffering.fragment_size = "96000" device.access_mode = "mmap+timer" device.profile.name = "analog-mono" device.profile.description = "Analog Mono" device.description = "Rapoo Wireless Audio Analog Mono" alsa.mixer_name = "USB Mixer" alsa.components = "USB24ae:6000" device.icon_name = "audio-input-microphone-analog-usb" Formats: pcm Sink Input #1 Driver: protocol-native.c Owner Module: 13 Client: 7 Sink: 1 Sample Specification: float32le 2ch 44100Hz Channel Map: front-left,front-right Format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\"" Corked: no Mute: no Volume: front-left: 93164 / 142% / 9.17 dB, front-right: 93164 / 142% / 9.17 dB balance 0.00 Buffer Latency: 91958 usec Sink Latency: 46471 usec Resample method: speex-float-1 Properties: media.name = "'\"Mondschein\" Sonate Nr. 14 cis-Moll, Op. 27 Nr. 2 : I. Adagio sostenuto' by 'Ludwig van Beethoven'" application.name = "gmusicbrowser" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" media.role = "music" application.icon_name = "gmusicbrowser" application.process.id = "18463" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "perl" window.x11.display = ":0" application.language = "en_US.UTF-8" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" module-stream-restore.id = "sink-input-by-media-role:music" media.title = "\"Mondschein\" Sonate Nr. 14 cis-Moll, Op. 27 Nr. 2 : I. Adagio sostenuto" media.artist = "Ludwig van Beethoven" Source Output #0 Driver: protocol-native.c Owner Module: 13 Client: 6 Source: 0 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 20839 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "3.0" application.process.id = "17858" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "pavucontrol" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #1 Driver: protocol-native.c Owner Module: 13 Client: 6 Source: 1 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 0 usec Source Latency: 1005 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "3.0" application.process.id = "17858" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "pavucontrol" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #2 Driver: protocol-native.c Owner Module: 13 Client: 6 Source: 2 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 34750 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "3.0" application.process.id = "17858" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "pavucontrol" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #3 Driver: protocol-native.c Owner Module: 13 Client: 6 Source: 3 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 0 usec Source Latency: 549 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "3.0" application.process.id = "17858" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "pavucontrol" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #6 Driver: protocol-native.c Owner Module: 13 Client: 6 Source: 2 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 34781 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "3.0" application.process.id = "17858" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "pavucontrol" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Client #0 Driver: module-systemd-login.c Owner Module: 20 Properties: application.name = "Login Session 5" systemd-login.session = "5" Client #1 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "Icedove" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.icon_name = "icedove" application.version = "45.1.0" application.process.id = "11583" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "icedove" window.x11.display = ":0" application.language = "en_US.UTF-8" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" Client #2 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "Firefox" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.icon_name = "firefox" application.version = "47.0.1" application.process.id = "11627" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "firefox" window.x11.display = ":0" application.language = "en_US.UTF-8" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" Client #3 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "KMix" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.process.id = "5031" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "kmix" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" application.icon_name = "kmix" Client #4 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "libphonon" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.process.id = "4770" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "kdeinit5" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" Client #5 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "libphonon" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.process.id = "13372" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "krdc" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" Client #6 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "3.0" application.process.id = "17858" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "pavucontrol" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" Client #7 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "gmusicbrowser" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" media.role = "music" application.icon_name = "gmusicbrowser" application.process.id = "18463" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "perl" window.x11.display = ":0" application.language = "en_US.UTF-8" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5" Client #23 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "pactl" native-protocol.peer = "UNIX socket client" native-protocol.version = "31" application.process.id = "19604" application.process.user = "rmm" application.process.host = "RMMbook" application.process.binary = "pactl" application.language = "C" window.x11.display = ":0" application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940" application.process.session_id = "5"
Server String: /run/user/1000/pulse/native Library Protocol Version: 31 Server Protocol Version: 31 Is Local: yes Client Index: 24 Tile Size: 65472 User Name: rmm Host Name: RMMbook Server Name: pulseaudio Server Version: 9.0 Default Sample Specification: s16le 2ch 44100Hz Default Channel Map: front-left,front-right Default Sink: alsa_output.0.analog-stereo Default Source: alsa_input.0.analog-stereo Cookie: 224e:0897