On Fri, Sep 16, 2016 at 06:25:27PM +0300, Paul Fertser wrote:
> In this case it would help to see -d3 output.
Attached are the output of
/tmp/openocd-0.5.0/src/openocd -s /tmp/openocd-0.5.0/tcl -f
/tmp/openocd-0.5.0/tcl/board/sheevaplug.cfg -d3
("openocd-good.log"), which is version 0.5.0-1 from Debian, and
/tmp/openocd-0.9.0/src/openocd -s /tmp/openocd-0.9.0/tcl -f
/tmp/openocd-0.9.0/tcl/board/sheevaplug.cfg -d3
("openocd-bad.log"), which is version 0.9.0-1+b1 from Debian.
I have to say, however, that success connecting to the DreamPlug even
with openocd-0.5.0 is somewhat random (quite often I get "Error: JTAG
scan chain interrogation failed: all zeroes"), and I couldn't quite
decide whether the cause lies in the JTAGKey module, its JTAG
connection with the DreamPlug, on the DreamPlug itself. For some
reason, success is much better when the DreamPlug is in the U-Boot
bootloader than when it is in the Linux kernel. It's also possible
that running openocd-0.9.0 causes later attempts to use openocd-0.5.0
to fail. None of this is reliably reproducible, so I can't be too
certain about anything. Maybe the hardware is flaky. Still, my
success rate with openocd >=0.8.0 is exactly zero, while with <=0.7.0
it is fairly high.
Happy hacking,
--
David A. Madore
( http://www.madore.org/~david/ )
Open On-Chip Debugger 0.5.0 (2016-09-16-09:33)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
User : 11 1 command.c:557 command_print(): debug_level: 3
Debug: 12 1 configuration.c:45 add_script_search_dir(): adding
/home/david/.openocd
Debug: 13 1 configuration.c:45 add_script_search_dir(): adding
/usr/share/openocd/site
Debug: 14 1 configuration.c:45 add_script_search_dir(): adding
/usr/share/openocd/scripts
Debug: 15 1 configuration.c:87 find_file(): found
/tmp/openocd-0.5.0/tcl/board/sheevaplug.cfg
Debug: 16 1 configuration.c:87 find_file(): found
/tmp/openocd-0.5.0/tcl/interface/sheevaplug.cfg
Debug: 17 1 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_interface ft2232
Debug: 18 1 command.c:151 script_debug(): command - interface ocd_interface
ft2232
Debug: 20 1 command.c:364 register_command_handler(): registering
'ocd_ft2232_device_desc'...
Debug: 21 1 command.c:364 register_command_handler(): registering
'ocd_ft2232_serial'...
Debug: 22 1 command.c:364 register_command_handler(): registering
'ocd_ft2232_layout'...
Debug: 23 1 command.c:364 register_command_handler(): registering
'ocd_ft2232_vid_pid'...
Debug: 24 1 command.c:364 register_command_handler(): registering
'ocd_ft2232_latency'...
Info : 25 1 transport.c:123 allow_transports(): only one transport option;
autoselect 'jtag'
Debug: 26 1 command.c:364 register_command_handler(): registering
'ocd_jtag_flush_queue_sleep'...
Debug: 27 1 command.c:364 register_command_handler(): registering
'ocd_jtag_rclk'...
Debug: 28 1 command.c:364 register_command_handler(): registering
'ocd_jtag_ntrst_delay'...
Debug: 29 1 command.c:364 register_command_handler(): registering
'ocd_jtag_ntrst_assert_width'...
Debug: 30 1 command.c:364 register_command_handler(): registering
'ocd_scan_chain'...
Debug: 31 1 command.c:364 register_command_handler(): registering
'ocd_jtag_reset'...
Debug: 32 1 command.c:364 register_command_handler(): registering
'ocd_runtest'...
Debug: 33 1 command.c:364 register_command_handler(): registering
'ocd_irscan'...
Debug: 34 1 command.c:364 register_command_handler(): registering
'ocd_verify_ircapture'...
Debug: 35 1 command.c:364 register_command_handler(): registering
'ocd_verify_jtag'...
Debug: 36 1 command.c:364 register_command_handler(): registering
'ocd_tms_sequence'...
Debug: 37 1 command.c:364 register_command_handler(): registering
'ocd_wait_srst_deassert'...
Debug: 38 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 39 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 40 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 41 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 42 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 43 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 44 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 45 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 46 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 47 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 48 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 49 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 50 1 command.c:364 register_command_handler(): registering 'ocd_jtag'...
Debug: 51 1 command.c:364 register_command_handler(): registering 'ocd_svf'...
Debug: 52 1 command.c:364 register_command_handler(): registering 'ocd_xsvf'...
Debug: 53 1 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_ft2232_layout sheevaplug
Debug: 54 1 command.c:151 script_debug(): command - ft2232_layout
ocd_ft2232_layout sheevaplug
Debug: 56 1 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_ft2232_vid_pid 0x9e88 0x9e8f
Debug: 57 1 command.c:151 script_debug(): command - ft2232_vid_pid
ocd_ft2232_vid_pid 0x9e88 0x9e8f
Debug: 59 1 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_ft2232_device_desc SheevaPlug JTAGKey FT2232D B
Debug: 60 1 command.c:151 script_debug(): command - ft2232_device_desc
ocd_ft2232_device_desc SheevaPlug JTAGKey FT2232D B
Debug: 62 1 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_adapter_khz 2000
Debug: 63 1 command.c:151 script_debug(): command - adapter_khz ocd_adapter_khz
2000
Debug: 65 1 core.c:1639 jtag_config_khz(): handle jtag khz
Debug: 66 1 core.c:1602 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 67 1 core.c:1602 adapter_khz_to_speed(): convert khz to interface
specific speed value
User : 68 1 command.c:557 command_print(): 2000 kHz
Debug: 69 1 configuration.c:87 find_file(): found
/tmp/openocd-0.5.0/tcl/target/feroceon.cfg
Debug: 70 1 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_jtag newtap feroceon cpu -irlen 4 -ircapture 0x1 -irmask 0xf
-expected-id 0x20a023d3
Debug: 71 1 command.c:151 script_debug(): command - ocd_jtag ocd_jtag newtap
feroceon cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x20a023d3
Debug: 72 1 tcl.c:575 jim_newtap_cmd(): Creating New Tap, Chip: feroceon, Tap:
cpu, Dotted: feroceon.cpu, 8 params
Debug: 73 1 tcl.c:592 jim_newtap_cmd(): Processing option: -irlen
Debug: 74 1 tcl.c:592 jim_newtap_cmd(): Processing option: -ircapture
Debug: 75 1 tcl.c:592 jim_newtap_cmd(): Processing option: -irmask
Debug: 76 1 tcl.c:592 jim_newtap_cmd(): Processing option: -expected-id
Debug: 77 1 core.c:1337 jtag_tap_init(): Created Tap: feroceon.cpu @ abs
position 0, irlen 4, capture: 0x1 mask: 0xf
Debug: 78 1 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_target create feroceon.cpu feroceon -endian little -chain-position
feroceon.cpu
Debug: 79 1 command.c:151 script_debug(): command - ocd_target ocd_target
create feroceon.cpu feroceon -endian little -chain-position feroceon.cpu
Debug: 80 1 command.c:364 register_command_handler(): registering 'ocd_arm'...
Debug: 81 1 command.c:364 register_command_handler(): registering 'ocd_arm'...
Debug: 82 1 command.c:364 register_command_handler(): registering 'ocd_arm'...
Debug: 83 1 command.c:364 register_command_handler(): registering 'ocd_arm'...
Debug: 84 1 command.c:364 register_command_handler(): registering 'ocd_arm'...
Debug: 85 1 command.c:364 register_command_handler(): registering 'ocd_arm'...
Debug: 86 1 command.c:364 register_command_handler(): registering 'ocd_etm'...
Debug: 87 1 command.c:364 register_command_handler(): registering
'ocd_arm7_9'...
Debug: 88 1 command.c:364 register_command_handler(): registering
'ocd_arm7_9'...
Debug: 89 1 command.c:364 register_command_handler(): registering
'ocd_arm7_9'...
Debug: 90 1 command.c:364 register_command_handler(): registering 'ocd_arm9'...
Debug: 91 1 command.c:364 register_command_handler(): registering
'ocd_arm926ejs'...
Debug: 92 1 armv4_5.c:397 arm_set_cpsr(): set CPSR 0x00000010: User mode, ARM
state
Debug: 93 1 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 94 1 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 95 1 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 96 1 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 97 1 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 98 1 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 99 1 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 100 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 101 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 102 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 103 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 104 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 105 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 106 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 107 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 108 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 109 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 110 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 111 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 112 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 113 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 114 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 115 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 116 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 117 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 118 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 119 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 120 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 121 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 122 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 123 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 124 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 125 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 126 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 127 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 128 2 command.c:364 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 129 2 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_reset_config trst_and_srst
Debug: 130 2 command.c:151 script_debug(): command - reset_config
ocd_reset_config trst_and_srst
User : 132 2 command.c:557 command_print(): trst_and_srst separate
srst_gates_jtag trst_push_pull srst_open_drain
Debug: 133 2 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_adapter_nsrst_delay 200
Debug: 134 2 command.c:151 script_debug(): command - adapter_nsrst_delay
ocd_adapter_nsrst_delay 200
User : 136 2 command.c:557 command_print(): adapter_nsrst_delay: 200
Debug: 137 2 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_jtag_ntrst_delay 200
Debug: 138 2 command.c:151 script_debug(): command - jtag_ntrst_delay
ocd_jtag_ntrst_delay 200
User : 140 2 command.c:557 command_print(): jtag_ntrst_delay: 200
Debug: 141 2 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_feroceon.cpu configure -work-area-phys 0x10000000 -work-area-size
65536 -work-area-backup 0
Debug: 142 2 command.c:151 script_debug(): command - ocd_feroceon.cpu
ocd_feroceon.cpu configure -work-area-phys 0x10000000 -work-area-size 65536
-work-area-backup 0
Debug: 143 2 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_arm7_9 dcc_downloads enable
Debug: 144 2 command.c:151 script_debug(): command - ocd_arm7_9 ocd_arm7_9
dcc_downloads enable
User : 146 2 command.c:557 command_print(): dcc downloads are enabled
Debug: 147 2 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_nand device feroceon.flash orion 0 0xd8000000
Debug: 148 2 command.c:151 script_debug(): command - ocd_nand ocd_nand device
feroceon.flash orion 0 0xd8000000
Warn : 150 2 target.c:375 get_target(): use 'feroceon.cpu' as target
identifier, not '0'
User : 151 2 command.c:707 command_run_line(): sheevaplug_load_ubootUser : 152
2 command.c:709 command_run_line():
Debug: 153 2 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_init
Debug: 154 2 command.c:151 script_debug(): command - init ocd_init
Debug: 156 2 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_target init
Debug: 157 2 command.c:151 script_debug(): command - ocd_target ocd_target init
Debug: 159 2 target.c:930 handle_target_init_command(): Initializing targets...
Debug: 160 2 command.c:364 register_command_handler(): registering
'ocd_target_request'...
Debug: 161 2 command.c:364 register_command_handler(): registering
'ocd_trace'...
Debug: 162 2 command.c:364 register_command_handler(): registering
'ocd_trace'...
Debug: 163 2 command.c:364 register_command_handler(): registering
'ocd_fast_load_image'...
Debug: 164 2 command.c:364 register_command_handler(): registering
'ocd_fast_load'...
Debug: 165 2 command.c:364 register_command_handler(): registering
'ocd_profile'...
Debug: 166 2 command.c:364 register_command_handler(): registering
'ocd_virt2phys'...
Debug: 167 2 command.c:364 register_command_handler(): registering 'ocd_reg'...
Debug: 168 2 command.c:364 register_command_handler(): registering 'ocd_poll'...
Debug: 169 2 command.c:364 register_command_handler(): registering
'ocd_wait_halt'...
Debug: 170 2 command.c:364 register_command_handler(): registering 'ocd_halt'...
Debug: 171 2 command.c:364 register_command_handler(): registering
'ocd_resume'...
Debug: 172 2 command.c:364 register_command_handler(): registering
'ocd_reset'...
Debug: 173 2 command.c:364 register_command_handler(): registering
'ocd_soft_reset_halt'...
Debug: 174 2 command.c:364 register_command_handler(): registering 'ocd_step'...
Debug: 175 2 command.c:364 register_command_handler(): registering 'ocd_mdw'...
Debug: 176 2 command.c:364 register_command_handler(): registering 'ocd_mdh'...
Debug: 177 2 command.c:364 register_command_handler(): registering 'ocd_mdb'...
Debug: 178 2 command.c:364 register_command_handler(): registering 'ocd_mww'...
Debug: 179 2 command.c:364 register_command_handler(): registering 'ocd_mwh'...
Debug: 180 2 command.c:364 register_command_handler(): registering 'ocd_mwb'...
Debug: 181 2 command.c:364 register_command_handler(): registering 'ocd_bp'...
Debug: 182 2 command.c:364 register_command_handler(): registering 'ocd_rbp'...
Debug: 183 2 command.c:364 register_command_handler(): registering 'ocd_wp'...
Debug: 184 2 command.c:364 register_command_handler(): registering 'ocd_rwp'...
Debug: 185 2 command.c:364 register_command_handler(): registering
'ocd_load_image'...
Debug: 186 2 command.c:364 register_command_handler(): registering
'ocd_dump_image'...
Debug: 187 2 command.c:364 register_command_handler(): registering
'ocd_verify_image'...
Debug: 188 2 command.c:364 register_command_handler(): registering
'ocd_test_image'...
Debug: 189 2 command.c:364 register_command_handler(): registering
'ocd_reset_nag'...
Debug: 190 2 ft2232.c:2469 ft2232_init(): ft2232 interface using shortest path
jtag state transitions
Debug: 191 2 ft2232.c:2342 ft2232_init_libftdi(): 'ft2232' interface using
libftdi with 'sheevaplug' layout (9e88:9e8f)
Debug: 192 56 ft2232.c:2389 ft2232_init_libftdi(): current latency timer: 2
Debug: 193 58 ft2232.c:2400 ft2232_init_libftdi(): FTDI chip type: 2 "2232C"
Debug: 194 58 ft2232.c:2426 ft2232_set_data_bits_low_byte(): 80 08 1b
Debug: 195 58 ft2232.c:2446 ft2232_set_data_bits_high_byte(): 82 06 0f
Debug: 196 62 core.c:1602 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 197 62 core.c:1606 adapter_khz_to_speed(): have interface set up
Debug: 198 62 ft2232.c:676 ft2232_speed(): 86 02 00
Debug: 199 62 core.c:1602 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 200 62 core.c:1606 adapter_khz_to_speed(): have interface set up
Info : 201 62 core.c:1421 adapter_init(): clock speed 2000 kHz
Debug: 202 62 openocd.c:137 handle_init_command(): Debug Adapter init complete
Debug: 203 62 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_transport init
Debug: 204 62 command.c:151 script_debug(): command - ocd_transport
ocd_transport init
Debug: 206 62 transport.c:255 handle_transport_init(): handle_transport_init
Debug: 207 63 ft2232.c:1689 sheevaplug_reset(): trst: 0, srst: 0, high_output:
0x06, high_direction: 0x0f
Debug: 208 63 core.c:713 jtag_add_reset(): SRST line released
Debug: 209 63 core.c:737 jtag_add_reset(): TRST line released
Debug: 210 63 core.c:329 jtag_call_event_callbacks(): jtag event: TAP reset
Debug: 211 470 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_jtag arp_init
Debug: 212 470 command.c:151 script_debug(): command - ocd_jtag ocd_jtag
arp_init
Debug: 213 470 core.c:1435 jtag_init_inner(): Init JTAG chain
Debug: 214 470 core.c:329 jtag_call_event_callbacks(): jtag event: TAP reset
Debug: 215 470 core.c:1055 jtag_examine_chain(): DR scan interrogation for
IDCODE/BYPASS
Debug: 216 470 core.c:329 jtag_call_event_callbacks(): jtag event: TAP reset
Error: 217 472 core.c:945 jtag_examine_chain_check(): JTAG scan chain
interrogation failed: all zeroes
Error: 218 472 core.c:946 jtag_examine_chain_check(): Check JTAG interface,
timings, target power, etc.
Error: 219 472 core.c:1479 jtag_init_inner(): Trying to use configured scan
chain anyway...
Debug: 220 472 core.c:1219 jtag_validate_ircapture(): IR capture validation scan
Error: 221 474 core.c:1274 jtag_validate_ircapture(): feroceon.cpu: IR capture
error; saw 0x00 not 0x01
Debug: 222 474 core.c:329 jtag_call_event_callbacks(): jtag event: TAP reset
Warn : 223 474 core.c:1503 jtag_init_inner(): Bypassing JTAG setup events due
to errors
Debug: 224 474 openocd.c:150 handle_init_command(): Examining targets...
Info : 225 476 embeddedice.c:231 embeddedice_build_reg_cache(): Embedded ICE
version 0
Info : 226 476 embeddedice.c:303 embeddedice_build_reg_cache(): feroceon.cpu:
hardware has 1 breakpoint/watchpoint unit
Debug: 227 476 arm7_9_common.c:75 arm7_9_clear_watchpoints(): -
Debug: 228 476 embeddedice.c:501 embeddedice_write_reg(): 12: 0x00000000
Debug: 229 476 embeddedice.c:501 embeddedice_write_reg(): 20: 0x00000000
Error: 230 476 feroceon.c:671 feroceon_examine(): unexpected Feroceon EICE
version signature
Debug: 231 476 embeddedice.c:501 embeddedice_write_reg(): 2: 0x00000000
Debug: 232 478 embeddedice.c:501 embeddedice_write_reg(): 0: 0x00000000
Debug: 233 478 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_flash init
Debug: 234 478 command.c:151 script_debug(): command - ocd_flash ocd_flash init
Debug: 236 480 tcl.c:912 handle_flash_init_command(): Initializing flash
devices...
Debug: 237 480 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_mflash init
Debug: 238 480 command.c:151 script_debug(): command - ocd_mflash ocd_mflash
init
Debug: 240 482 mflash.c:1331 handle_mflash_init_command(): Initializing mflash
devices...
Debug: 241 482 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_nand init
Debug: 242 482 command.c:151 script_debug(): command - ocd_nand ocd_nand init
Debug: 244 484 tcl.c:521 handle_nand_init_command(): Initializing NAND
devices...
Debug: 245 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 246 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 247 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 248 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 249 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 250 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 251 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 252 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 253 484 command.c:364 register_command_handler(): registering
'ocd_nand'...
Debug: 254 484 command.c:151 script_debug(): command - ocd_command ocd_command
type ocd_pld init
Debug: 255 484 command.c:151 script_debug(): command - ocd_pld ocd_pld init
Debug: 257 486 pld.c:232 handle_pld_init_command(): Initializing PLDs...
Open On-Chip Debugger 0.9.0 (2016-09-16-09:31)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
User : 13 0 command.c:546 command_print(): debug_level: 3
Debug: 14 0 options.c:98 add_default_dirs(): bindir=/usr/bin
Debug: 15 0 options.c:99 add_default_dirs(): pkgdatadir=/usr/share/openocd
Debug: 16 0 options.c:100 add_default_dirs(): run_prefix=
Debug: 17 0 configuration.c:44 add_script_search_dir(): adding
/home/david/.openocd
Debug: 18 0 configuration.c:44 add_script_search_dir(): adding
/usr/share/openocd/site
Debug: 19 0 configuration.c:44 add_script_search_dir(): adding
/usr/share/openocd/scripts
Debug: 20 0 configuration.c:84 find_file(): found
/tmp/openocd-0.9.0/tcl/board/sheevaplug.cfg
Debug: 21 0 configuration.c:84 find_file(): found
/tmp/openocd-0.9.0/tcl/interface/ftdi/sheevaplug.cfg
Debug: 22 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_interface ftdi
Debug: 23 1 command.c:145 script_debug(): command - interface ocd_interface ftdi
Debug: 25 1 command.c:366 register_command_handler(): registering
'ocd_ftdi_device_desc'...
Debug: 26 1 command.c:366 register_command_handler(): registering
'ocd_ftdi_serial'...
Debug: 27 1 command.c:366 register_command_handler(): registering
'ocd_ftdi_channel'...
Debug: 28 1 command.c:366 register_command_handler(): registering
'ocd_ftdi_layout_init'...
Debug: 29 1 command.c:366 register_command_handler(): registering
'ocd_ftdi_layout_signal'...
Debug: 30 1 command.c:366 register_command_handler(): registering
'ocd_ftdi_set_signal'...
Debug: 31 1 command.c:366 register_command_handler(): registering
'ocd_ftdi_vid_pid'...
Debug: 32 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_ftdi_vid_pid 0x9e88 0x9e8f
Debug: 33 1 command.c:145 script_debug(): command - ftdi_vid_pid
ocd_ftdi_vid_pid 0x9e88 0x9e8f
Debug: 35 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_ftdi_channel 1
Debug: 36 1 command.c:145 script_debug(): command - ftdi_channel
ocd_ftdi_channel 1
Debug: 38 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_ftdi_layout_init 0x0608 0x0f1b
Debug: 39 1 command.c:145 script_debug(): command - ftdi_layout_init
ocd_ftdi_layout_init 0x0608 0x0f1b
Debug: 41 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_ftdi_layout_signal nTRST -data 0x0200
Debug: 42 1 command.c:145 script_debug(): command - ftdi_layout_signal
ocd_ftdi_layout_signal nTRST -data 0x0200
Debug: 44 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_ftdi_layout_signal nSRST -noe 0x0400
Debug: 45 1 command.c:145 script_debug(): command - ftdi_layout_signal
ocd_ftdi_layout_signal nSRST -noe 0x0400
Debug: 47 1 configuration.c:84 find_file(): found
/tmp/openocd-0.9.0/tcl/target/feroceon.cfg
Debug: 48 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_transport select
Debug: 49 1 command.c:145 script_debug(): command - ocd_transport ocd_transport
select
Info : 50 1 transport.c:287 jim_transport_select(): auto-selecting first
available session transport "jtag". To override use 'transport select
<transport>'.
Debug: 51 1 command.c:366 register_command_handler(): registering
'ocd_jtag_flush_queue_sleep'...
Debug: 52 1 command.c:366 register_command_handler(): registering
'ocd_jtag_rclk'...
Debug: 53 1 command.c:366 register_command_handler(): registering
'ocd_jtag_ntrst_delay'...
Debug: 54 1 command.c:366 register_command_handler(): registering
'ocd_jtag_ntrst_assert_width'...
Debug: 55 1 command.c:366 register_command_handler(): registering
'ocd_scan_chain'...
Debug: 56 1 command.c:366 register_command_handler(): registering
'ocd_jtag_reset'...
Debug: 57 1 command.c:366 register_command_handler(): registering
'ocd_runtest'...
Debug: 58 1 command.c:366 register_command_handler(): registering
'ocd_irscan'...
Debug: 59 1 command.c:366 register_command_handler(): registering
'ocd_verify_ircapture'...
Debug: 60 1 command.c:366 register_command_handler(): registering
'ocd_verify_jtag'...
Debug: 61 1 command.c:366 register_command_handler(): registering
'ocd_tms_sequence'...
Debug: 62 1 command.c:366 register_command_handler(): registering
'ocd_wait_srst_deassert'...
Debug: 63 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 64 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 65 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 66 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 67 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 68 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 69 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 70 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 71 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 72 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 73 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 74 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 75 1 command.c:366 register_command_handler(): registering 'ocd_jtag'...
Debug: 76 1 command.c:366 register_command_handler(): registering 'ocd_svf'...
Debug: 77 1 command.c:366 register_command_handler(): registering 'ocd_xsvf'...
Debug: 78 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_transport select
Debug: 79 1 command.c:145 script_debug(): command - ocd_transport ocd_transport
select
Debug: 80 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_jtag newtap feroceon cpu -irlen 4 -ircapture 0x1 -irmask 0xf
-expected-id 0x20a023d3
Debug: 81 1 command.c:145 script_debug(): command - ocd_jtag ocd_jtag newtap
feroceon cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x20a023d3
Debug: 82 1 tcl.c:549 jim_newtap_cmd(): Creating New Tap, Chip: feroceon, Tap:
cpu, Dotted: feroceon.cpu, 8 params
Debug: 83 1 tcl.c:573 jim_newtap_cmd(): Processing option: -irlen
Debug: 84 1 tcl.c:573 jim_newtap_cmd(): Processing option: -ircapture
Debug: 85 1 tcl.c:573 jim_newtap_cmd(): Processing option: -irmask
Debug: 86 1 tcl.c:573 jim_newtap_cmd(): Processing option: -expected-id
Debug: 87 1 core.c:1302 jtag_tap_init(): Created Tap: feroceon.cpu @ abs
position 0, irlen 4, capture: 0x1 mask: 0xf
Debug: 88 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_target create feroceon.cpu feroceon -endian little -chain-position
feroceon.cpu
Debug: 89 1 command.c:145 script_debug(): command - ocd_target ocd_target
create feroceon.cpu feroceon -endian little -chain-position feroceon.cpu
Debug: 90 1 target.c:1837 target_free_all_working_areas_restore(): freeing all
working areas
Debug: 91 1 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 92 1 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 93 1 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 94 1 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 95 1 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 96 1 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 97 1 command.c:366 register_command_handler(): registering 'ocd_etm'...
Debug: 98 1 command.c:366 register_command_handler(): registering
'ocd_arm7_9'...
Debug: 99 1 command.c:366 register_command_handler(): registering
'ocd_arm7_9'...
Debug: 100 1 command.c:366 register_command_handler(): registering
'ocd_arm7_9'...
Debug: 101 1 command.c:366 register_command_handler(): registering 'ocd_arm9'...
Debug: 102 1 command.c:366 register_command_handler(): registering
'ocd_arm926ejs'...
Debug: 103 1 armv4_5.c:422 arm_set_cpsr(): set CPSR 0x00000010: User mode, ARM
state
Debug: 104 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 105 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 106 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 107 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 108 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 109 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 110 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 111 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 112 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 113 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 114 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 115 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 116 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 117 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 118 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 119 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 120 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 121 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 122 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 123 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 124 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 125 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 126 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 127 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 128 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 129 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 130 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 131 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 132 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 133 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 134 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 135 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 136 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 137 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 138 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 139 1 command.c:366 register_command_handler(): registering
'ocd_feroceon.cpu'...
Debug: 140 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_reset_config trst_and_srst
Debug: 141 1 command.c:145 script_debug(): command - reset_config
ocd_reset_config trst_and_srst
User : 143 1 command.c:546 command_print(): trst_and_srst separate
srst_gates_jtag trst_push_pull srst_open_drain connect_deassert_srst
Debug: 144 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_adapter_nsrst_delay 200
Debug: 145 1 command.c:145 script_debug(): command - adapter_nsrst_delay
ocd_adapter_nsrst_delay 200
User : 147 1 command.c:546 command_print(): adapter_nsrst_delay: 200
Debug: 148 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_jtag_ntrst_delay 200
Debug: 149 1 command.c:145 script_debug(): command - jtag_ntrst_delay
ocd_jtag_ntrst_delay 200
User : 151 1 command.c:546 command_print(): jtag_ntrst_delay: 200
Debug: 152 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_adapter_khz 2000
Debug: 153 1 command.c:145 script_debug(): command - adapter_khz
ocd_adapter_khz 2000
Debug: 155 1 core.c:1629 jtag_config_khz(): handle jtag khz
Debug: 156 1 core.c:1596 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 157 1 core.c:1596 adapter_khz_to_speed(): convert khz to interface
specific speed value
User : 158 1 command.c:546 command_print(): adapter speed: 2000 kHz
Debug: 159 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_feroceon.cpu configure -work-area-phys 0x10000000 -work-area-size
65536 -work-area-backup 0
Debug: 160 1 command.c:145 script_debug(): command - ocd_feroceon.cpu
ocd_feroceon.cpu configure -work-area-phys 0x10000000 -work-area-size 65536
-work-area-backup 0
Debug: 161 1 target.c:1837 target_free_all_working_areas_restore(): freeing all
working areas
Debug: 162 1 target.c:1837 target_free_all_working_areas_restore(): freeing all
working areas
Debug: 163 1 target.c:1837 target_free_all_working_areas_restore(): freeing all
working areas
Debug: 164 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_arm7_9 dcc_downloads enable
Debug: 165 1 command.c:145 script_debug(): command - ocd_arm7_9 ocd_arm7_9
dcc_downloads enable
User : 167 1 command.c:546 command_print(): dcc downloads are enabled
Debug: 168 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_nand device feroceon.flash orion 0 0xd8000000
Debug: 169 1 command.c:145 script_debug(): command - ocd_nand ocd_nand device
feroceon.flash orion 0 0xd8000000
Warn : 171 1 target.c:480 get_target(): use 'feroceon.cpu' as target
identifier, not '0'
User : 172 1 command.c:677 command_run_line(): sheevaplug_load_ubootUser : 173
1 command.c:679 command_run_line():
Debug: 174 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_init
Debug: 175 1 command.c:145 script_debug(): command - init ocd_init
Debug: 177 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_target init
Debug: 178 1 command.c:145 script_debug(): command - ocd_target ocd_target init
Debug: 180 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_target names
Debug: 181 1 command.c:145 script_debug(): command - ocd_target ocd_target names
Debug: 182 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_feroceon.cpu cget -event gdb-flash-erase-start
Debug: 183 1 command.c:145 script_debug(): command - ocd_feroceon.cpu
ocd_feroceon.cpu cget -event gdb-flash-erase-start
Debug: 184 1 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_feroceon.cpu configure -event gdb-flash-erase-start reset init
Debug: 185 1 command.c:145 script_debug(): command - ocd_feroceon.cpu
ocd_feroceon.cpu configure -event gdb-flash-erase-start reset init
Debug: 186 2 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_feroceon.cpu cget -event gdb-flash-write-end
Debug: 187 2 command.c:145 script_debug(): command - ocd_feroceon.cpu
ocd_feroceon.cpu cget -event gdb-flash-write-end
Debug: 188 2 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_feroceon.cpu configure -event gdb-flash-write-end reset halt
Debug: 189 2 command.c:145 script_debug(): command - ocd_feroceon.cpu
ocd_feroceon.cpu configure -event gdb-flash-write-end reset halt
Debug: 190 2 target.c:1313 handle_target_init_command(): Initializing targets...
Debug: 191 2 command.c:366 register_command_handler(): registering
'ocd_target_request'...
Debug: 192 2 command.c:366 register_command_handler(): registering
'ocd_trace'...
Debug: 193 2 command.c:366 register_command_handler(): registering
'ocd_trace'...
Debug: 194 2 command.c:366 register_command_handler(): registering
'ocd_fast_load_image'...
Debug: 195 2 command.c:366 register_command_handler(): registering
'ocd_fast_load'...
Debug: 196 2 command.c:366 register_command_handler(): registering
'ocd_profile'...
Debug: 197 2 command.c:366 register_command_handler(): registering
'ocd_virt2phys'...
Debug: 198 2 command.c:366 register_command_handler(): registering 'ocd_reg'...
Debug: 199 2 command.c:366 register_command_handler(): registering 'ocd_poll'...
Debug: 200 2 command.c:366 register_command_handler(): registering
'ocd_wait_halt'...
Debug: 201 2 command.c:366 register_command_handler(): registering 'ocd_halt'...
Debug: 202 2 command.c:366 register_command_handler(): registering
'ocd_resume'...
Debug: 203 2 command.c:366 register_command_handler(): registering
'ocd_reset'...
Debug: 204 2 command.c:366 register_command_handler(): registering
'ocd_soft_reset_halt'...
Debug: 205 2 command.c:366 register_command_handler(): registering 'ocd_step'...
Debug: 206 2 command.c:366 register_command_handler(): registering 'ocd_mdw'...
Debug: 207 2 command.c:366 register_command_handler(): registering 'ocd_mdh'...
Debug: 208 2 command.c:366 register_command_handler(): registering 'ocd_mdb'...
Debug: 209 2 command.c:366 register_command_handler(): registering 'ocd_mww'...
Debug: 210 2 command.c:366 register_command_handler(): registering 'ocd_mwh'...
Debug: 211 2 command.c:366 register_command_handler(): registering 'ocd_mwb'...
Debug: 212 2 command.c:366 register_command_handler(): registering 'ocd_bp'...
Debug: 213 2 command.c:366 register_command_handler(): registering 'ocd_rbp'...
Debug: 214 2 command.c:366 register_command_handler(): registering 'ocd_wp'...
Debug: 215 2 command.c:366 register_command_handler(): registering 'ocd_rwp'...
Debug: 216 2 command.c:366 register_command_handler(): registering
'ocd_load_image'...
Debug: 217 2 command.c:366 register_command_handler(): registering
'ocd_dump_image'...
Debug: 218 2 command.c:366 register_command_handler(): registering
'ocd_verify_image'...
Debug: 219 2 command.c:366 register_command_handler(): registering
'ocd_test_image'...
Debug: 220 2 command.c:366 register_command_handler(): registering
'ocd_reset_nag'...
Debug: 221 2 command.c:366 register_command_handler(): registering 'ocd_ps'...
Debug: 222 2 command.c:366 register_command_handler(): registering
'ocd_test_mem_access'...
Debug: 223 2 ftdi.c:625 ftdi_initialize(): ftdi interface using shortest path
jtag state transitions
Debug: 224 8 mpsse.c:363 mpsse_purge(): -
Debug: 225 12 mpsse.c:644 mpsse_loopback_config(): off
Debug: 226 12 mpsse.c:689 mpsse_set_frequency(): target 2000000 Hz
Debug: 227 12 mpsse.c:650 mpsse_set_divisor(): 2
Debug: 228 12 mpsse.c:713 mpsse_set_frequency(): actually 2000000 Hz
Debug: 229 12 core.c:1596 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 230 12 core.c:1599 adapter_khz_to_speed(): have interface set up
Debug: 231 12 mpsse.c:689 mpsse_set_frequency(): target 2000000 Hz
Debug: 232 12 mpsse.c:650 mpsse_set_divisor(): 2
Debug: 233 12 mpsse.c:713 mpsse_set_frequency(): actually 2000000 Hz
Debug: 234 12 core.c:1596 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 235 12 core.c:1599 adapter_khz_to_speed(): have interface set up
Info : 236 12 core.c:1384 adapter_init(): clock speed 2000 kHz
Debug: 237 12 openocd.c:137 handle_init_command(): Debug Adapter init complete
Debug: 238 12 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_transport init
Debug: 239 12 command.c:145 script_debug(): command - ocd_transport
ocd_transport init
Debug: 241 12 transport.c:240 handle_transport_init(): handle_transport_init
Debug: 242 12 core.c:730 jtag_add_reset(): SRST line released
Debug: 243 12 core.c:754 jtag_add_reset(): TRST line released
Debug: 244 12 core.c:328 jtag_call_event_callbacks(): jtag event: TAP reset
Debug: 245 419 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_jtag arp_init
Debug: 246 419 command.c:145 script_debug(): command - ocd_jtag ocd_jtag
arp_init
Debug: 247 419 core.c:1397 jtag_init_inner(): Init JTAG chain
Debug: 248 419 core.c:328 jtag_call_event_callbacks(): jtag event: TAP reset
Debug: 249 419 core.c:1058 jtag_examine_chain(): DR scan interrogation for
IDCODE/BYPASS
Debug: 250 419 core.c:328 jtag_call_event_callbacks(): jtag event: TAP reset
