Hi!
This seems to be the "new" default environment:
=> printenv
arch=arm
baudrate=115200
board=clearfog
board_name=clearfog
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr}
${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r}
efi/boot/bootarm.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r}
${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr}
${prefix}extlinux/extlinux.conf
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_targets=mmc0 usb0 pxe dhcp
bootcmd=run distro_bootcmd
bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp};
then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; if test -z
"${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile
${soc}-${board}${boardver}.dtb; fi; setenv efi_old_vci ${bootp_vci};setenv
efi_old_arch ${bootp_arch};setenv bootp_vci
PXEClient:Arch:00010:UNDI:003000;setenv bootp_arch 0xa;if dhcp
${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr
${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi
${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv
bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv
efi_old_vci;
bootcmd_mmc0=setenv devnum 0; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_usb0=setenv devnum 0; run usb_boot
bootdelay=3
console=ttyS0,115200
cpu=armv7
devnum=0
devplist=1
devtype=mmc
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
efi_dtb_prefixes=/ /dtb/ /dtb/current/
fdt_addr_r=0x100000
fdt_high=0x10000000
fdtcontroladdr=3fb4ce58
fdtfile=armada-388-clearfog.dtb
initrd_high=0x10000000
kernel_addr_r=0x800000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r}
${prefix}${efi_fdtfile}
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run
scan_dev_for_boot_part; fi
pxefile_addr_r=0x300000
ramdisk_addr_r=0x1800000
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for
prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run
scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env
exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if
fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run
scan_dev_for_boot; fi; done
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n
"${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; for
prefix in ${efi_dtb_prefixes}; do if test -e ${devtype}
${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb;
fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart}
efi/boot/bootarm.efi; then echo Found EFI removable media binary
efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...;
fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart}
${prefix}extlinux/extlinux.conf; then echo Found
${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED:
continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype}
${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script
${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi;
done
scriptaddr=0x200000
soc=mvebu
stderr=serial@12000
stdin=serial@12000
stdout=serial@12000
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run
scan_dev_for_boot_part; fi
vendor=solidrun
Environment size: 3819/65532 bytes
--
9FED 5C6C E206 B70A 5857 70CA 9655 22B9 D49A E731
Debian Developer | Lisp Hacker | CaCert Assurer
