Package: linux-image-6.1.0-10-amd64
Version: 6.1.37-1
The journal shows several warnings (orange texts “usb 3-1.8: config 0
has an invalid interface number: 3 but max is 2”, “config 0 has no
interface number 2”, and “usb 3-1.8: config 0 descriptor??”):
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: new full-speed
USB device number 4 using ehci-pci
Jul 15 15:21:43 AnonymizedMachineName kernel: scsi 0:0:0:0:
Direct-Access ATA SAMSUNG SSD PM83 3D1Q PQ: 0 ANSI: 5
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 1-1.5: New USB device
found, idVendor=0c45, idProduct=643f, bcdDevice=28.06
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 1-1.5: New USB device
strings: Mfr=2, Product=1, SerialNumber=0
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 1-1.5: Product:
Laptop_Integrated_Webcam_E4HD
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 1-1.5: Manufacturer:
CN0Y4TWT72487279AAYJA00
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: config 0 has an
invalid interface number: 3 but max is 2
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: config 0 has no
interface number 2
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: New USB device
found, idVendor=0a5c, idProduct=5801, bcdDevice= 1.01
Jul 15 15:21:43 AnonymizedMachineName kernel: ata2: SATA link up 6.0
Gbps (SStatus 133 SControl 300)
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Jul 15 15:21:43 AnonymizedMachineName kernel: ata2.00: ACPI cmd
f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: Product: 5880
Jul 15 15:21:43 AnonymizedMachineName kernel: ata2.00: ACPI cmd
b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: Manufacturer:
Broadcom Corp
Jul 15 15:21:43 AnonymizedMachineName kernel: ata2.00: ACPI cmd
00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: SerialNumber:
0123456789ABCD
Jul 15 15:21:43 AnonymizedMachineName kernel: usb 3-1.8: config 0
descriptor??
Jul 15 15:21:43 AnonymizedMachineName kernel: ata2.00: supports DRM
functions and may not be fully accessible
…
Jul 15 15:21:44 AnonymizedMachineName systemd[1]: Starting
systemd-udevd.service - Rule-based Manager for Device Events and Files...
Jul 15 15:21:46 AnonymizedMachineName mtp-probe[408]: checking bus 3,
device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8"
`lsusb -v` shows that they belong to the fingerprint sensor:
Bus 003 Device 004: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure
Applications Processor with fingerprint swipe sensor
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0a5c Broadcom Corp.
idProduct 0x5801 BCM5880 Secure Applications Processor with
fingerprint swipe sensor
bcdDevice 1.01
iManufacturer 1 Broadcom Corp
iProduct 2 5880
iSerial 3 0123456789ABCD
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x00ab
bNumInterfaces 3
bConfigurationValue 0
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4 Broadcom USH w/swipe sensor
** UNRECOGNIZED: 10 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 5 Contacted SmartCard
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 4000
dwMaxiumumClock 4000
bNumClockSupported 0
dwDataRate 9600 bps
dwMaxDataRate 250000 bps
bNumDataRatesSupp. 0
dwMaxIFSD 247
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 000102BA
Auto configuration based on ATR
Auto voltage selection
Auto clock change
Auto baud rate change
Auto PPS made by CCID
NAD value other than 0x00 accepted
TPDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 7 Broadcom USH
** UNRECOGNIZED: 10 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 32
Device Status: 0x0000
(Bus Powered)
The part “an invalid interface number: 3 but max is 2” doesn't sound
good. Any problem with the kernel or the driver? Will the fingerprint
sensor not work? At the same time, other USB devices (namely, physical
USB-A ports) sometimes fail due to physical wear (bad electrical
contact); so these problems might hypothetically be related. Moreover,
the machine experiences other problems later during boot, so what are
the extent and potential consequences of the warnings here?
Gratefully,
AlMa
