Package: installation-reports Boot method: CD Image version: August 14 netinstall image amd64 etch beta 3 Date: August 14 2 pm
Machine:Amd64 Processor:Sempron Memory: 1GB Partitions: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda4 / reiserfs notail 0 1 /dev/hda6 /cap1 reiserfs defaults 0 2 /dev/hda3 /cap2 reiserfs defaults 0 2 /dev/hda5 none swap sw 0 0 /dev/hdd /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Output of lspci and lspci -n: 00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) 00:00.0 0600: 1106:0204 00:00.1 0600: 1106:1204 00:00.2 0600: 1106:2204 00:00.3 0600: 1106:3204 00:00.4 0600: 1106:4204 00:00.7 0600: 1106:7204 00:01.0 0604: 1106:b188 00:0f.0 0101: 1106:3149 (rev 80) 00:0f.1 0101: 1106:0571 (rev 06) 00:10.0 0c03: 1106:3038 (rev 81) 00:10.1 0c03: 1106:3038 (rev 81) 00:10.2 0c03: 1106:3038 (rev 81) 00:10.3 0c03: 1106:3038 (rev 81) 00:10.4 0c03: 1106:3104 (rev 86) 00:11.0 0601: 1106:3227 00:12.0 0200: 1106:3065 (rev 78) 00:18.0 0600: 1022:1100 00:18.1 0600: 1022:1101 00:18.2 0600: 1022:1102 00:18.3 0600: 1022:1103 01:00.0 0300: 1106:3108 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [O] Comments/Problems: Love the new graphical installer (I loved the old one also ;-) Everything went smoothly except the GRUB setup did not detect my Kanotix installation in /dev/hda3. And X11 was not setup properly. It found the monitor Gateway VX900 but it could not detect my onboard Via graphics. And the vesa setup it tried did not work. (No screens found). I fixed this by coping my kanotix xorg.conf to /etc/X11 so I know the via driver works well with my on board graphics. Keep up the good work. Debian RULES! Luis Echevarria Graduate student Astronomy _____________________________________________________ No hay mas que un solo camino y ese quisiera tomar mas la suerte del andar maltrata y confunde al tino. Nadie niegue su destino es que ser hombre es seguir y un ideal perseguir por la vida hacia adelante sabiendo lo que fue enante y no donde va a morir. -- Juan Antonio Corretjer never mind what's been selling, it's what you'r buying --Fugazi (Blueprint) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]