Package: wodim Version: 5:1.0~pre4-1.1 Severity: important Thank you for wodim, I think this fork was the right thing to do, and it's maybe an occasion to clean-up the interface (I'll appreciate a gnu-options fashined interface) and get something more consistent with a Linux/Debian environment. But actually I can't get it working!
I had the following problem: I can burn the CD-RW, but than I get the following error when trying to mount it: mount: wrong fs type, bad option, bad superblock on /dev/hdc, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so I tried different CD-RW, and also tried to launch wodim with root permission with the same result. Here it is the -v output from wodim: This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any way, don't refer to it as "cdrecord". Send problem reports to [EMAIL PROTECTED], don't bother Joerg Schilling with any problems caused by this application. Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. wodim: Operation not permitted. WARNING: Cannot set RR-scheduler wodim: Permission denied. WARNING: Cannot set priority using setpriority(). wodim: WARNING: This causes a high risk for buffer underruns. scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Warning: Cannot gain SYS_RAWIO capability: Operation not permitted Possible reason: wodim not installed SUID root. wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 wodim: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30). TOC Type: 1 = CD-ROM Warning: This version of libscg has not been configured via the standard autoconfiguration method of the Schily makefile system. There is a high risk that the code is not configured correctly and for this reason will not behave as expected. atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'Slimtype' Identifikation : 'DVDRW SOSW-852S ' Revision : 'PRS9' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x002B Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1422080 = 1388 KB FIFO size : 4194304 = 4096 KB wodim: Cannot get next writable address for 'invisible' track. wodim: This means that we are checking recorded media. wodim: This media cannot be written in streaming mode anymore. wodim: If you like to write to 'preformatted' RW media, try to blank the media first. wodim: WARNING: Data may not fit on standard 74min disk. wodim: Operation not permitted. WARNING: Cannot set RR-scheduler wodim: Permission denied. WARNING: Cannot set priority using setpriority(). wodim: WARNING: This causes a high risk for buffer underruns. Error: Cannot gain SYS_RAWIO capability, is wodim installed SUID root? Reason: Operation not permitted wodim: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30). Track 01: data 652 MB Total size: 749 MB (74:17.62) = 334322 sectors Lout start: 750 MB (74:19/47) = 334322 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11625 (97:27/00) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 4A Disk type: Phase change Manuf. index: 0 Manufacturer: Illegal Manufacturer code Speed set to 1764 KB/s Starting to write CD/DVD at speed 10.0 in real TAO mode for single session. Last chance to quit, starting real write in 9 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Blanking PMA, TOC, pregap Blanking time: 20.583s wodim: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30). BURN-Free is OFF. Performing OPC... Starting new track at sector: 0 Track 01: 652 of 652 MB written (fifo 100%) [buf 100%] 10.0x. Track 01: Total bytes read/written: 684687360/684687360 (334320 sectors). Writing time: 473.508s Average write speed 9.4x. Min drive buffer fill was 10% Fixating... Fixating time: 33.998s -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17.11.061003.eramil Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages wodim depends on: ii libc6 2.3.6-7 GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. Versions of packages wodim recommends: ii mkisofs 4:2.01+01a01-2 Creates ISO-9660 CD-ROM filesystem -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]