richard <[EMAIL PROTECTED]> wrote: Hi,
Thanks, forwarding to Ilia :-) Nice assertion failure at the end of the log, looks like you may have a 64bit specific bug after all :) JB. > Output as requested follows: > > $ SANE_DEBUG_HP5590=255 scanimage -L > [sanei_debug] Setting debug level of hp5590 to 255. > [hp5590] SANE backed for HP 5550/5590/7650 1.0.2 > [hp5590] (c) Ilia Sotnikov <[EMAIL PROTECTED]> > [hp5590] attach_usb_device: Opening USB device > [hp5590] attach_usb_device: USB device opened > [hp5590] hp5590_init_scanner > [hp5590] hp5590_cmd: USB-in-USB: command : 0012 > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 0012, last > command: 0012, core status: 0000 > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verified successfully > [hp5590] HP5590 flags (0x0a) > [hp5590] HP5590 flags: ADF yes, TMA no, LCD yes > [hp5590] HP5590 firmware version: 1.05 > [hp5590] HP5590 max resolution X: 2400 DPI > [hp5590] HP5590 max resolution Y: 2400 DPI > [hp5590] HP5590 max pixels X: 20400 > [hp5590] HP5590 max pixels Y: 28128 > [hp5590] HP5590 max size X: 8.500 inches > [hp5590] HP5590 max size Y: 11.720 inches > [hp5590] HP5590 normal motor param: 100, max motor param: 1000 > [hp5590] hp5590_get_status > [hp5590] hp5590_init_scanner: scanner status OK > [hp5590] attach_usb_device: found HP5590 scanner at 'libusb:001:004' > [hp5590] attach_usb_device: Reading max scan count > [hp5590] hp5590_read_max_scan_count > [hp5590] Reading max scan count > [hp5590] hp5590_read_eeprom > [hp5590] Reading EEPROM: addr 0010, size 3 > [hp5590] hp5590_cmd: USB-in-USB: command : 00f2 > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if data was accepted > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: getting response > [hp5590] hp5590_control_msg: USB-in-USB: got correct response > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 00f2, last > command: 00f2, core status: 0000 > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verified successfully > [hp5590] hp5590_cmd: USB-in-USB: command : 0bf0 > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 00f0, last > command: 00f0, core status: 0000 > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verified successfully > [hp5590] Max scan count 3801088 > [hp5590] attach_usb_device: Max Scanning count 3801088 > [hp5590] attach_usb_device: Reading scan count > [hp5590] hp5590_read_scan_count > [hp5590] Reading scan count > [hp5590] hp5590_read_eeprom > [hp5590] Reading EEPROM: addr 0000, size 4 > [hp5590] hp5590_cmd: USB-in-USB: command : 00f2 > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if data was accepted > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: getting response > [hp5590] hp5590_control_msg: USB-in-USB: got correct response > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 00f2, last > command: 00f2, core status: 0000 > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verified successfully > [hp5590] hp5590_cmd: USB-in-USB: command : 0bf0 > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 00f0, last > command: 00f0, core status: 0000 > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verified successfully > [hp5590] Scan count 2981 > [hp5590] attach_usb_device: Scanning count 2981 > [hp5590] hp5590_read_part_number > [hp5590] hp5590_read_eeprom > [hp5590] Reading EEPROM: addr 001a, size 10 > [hp5590] hp5590_cmd: USB-in-USB: command : 00f2 > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if data was accepted > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: getting response > [hp5590] hp5590_control_msg: USB-in-USB: got correct response > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 00f2, last > command: 00f2, core status: 0000 > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verified successfully > [hp5590] hp5590_cmd: USB-in-USB: command : 0bf0 > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 00f0, last > command: 00f0, core status: 0000 > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verified successfully > [hp5590] Part number: 'N772TR1TV' > [hp5590] hp5590_stop_scan > [hp5590] hp5590_cmd: USB-in-USB: command : 011b > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if data was accepted > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: getting response > [hp5590] hp5590_control_msg: USB-in-USB: got correct response > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested > [hp5590] hp5590_control_msg: USB-in-USB: core data: no > [hp5590] hp5590_control_msg: USB-in-USB: sending control msg > [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control > message > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was > acknowledged > [hp5590] hp5590_get_ack > [hp5590] hp5590_get_ack: USB-in-USB: accepted > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 001b, last > command: 001b, core status: 0000 > [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verified successfully > [hp5590] sane_hp5590_get_devices, local only: 0 > [hp5590] Found 1 devices > device `v4l:/dev/video0' is a Noname Hauppauge WinTV-HVR1100 DVB-T/H virtual > device > device `hp5590:libusb:001:004' is a HP 5590 Workgroup scanner > [hp5590] sane_hp5590_exit > [hp5590] Assertion 'ptr->opts != NULL' failed at hp5590.c:360 > -- Julien BLACHE <[EMAIL PROTECTED]> | Debian, because code matters more Debian & GNU/Linux Developer | <http://www.debian.org> Public key available on <http://www.jblache.org> - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]