Source: sane-backends Version: 1.0.19~cvs20071213-1 richard <[EMAIL PROTECTED]> wrote:
Hi, >> That's without the hp5590.conf config file, right ? > > Correct. As far as I can tell all the *.conf files are deleted and > replaced. The /etc/sane.d/hp5590.conf file is gone. Great! That's it for #456009, then :) > However, if the "reset" button on the scanner is pressed, and xsane > restarted, the scanner is found. Similarly scanimage -L now works. > While I cannot be certain, I believe that the scanner's behaviour has > changed. My recollection of the earlier behaviour is that neither the > reset button, the on/off switch, nor disconnecting the power lead had > any effect. > > The bug is fixed IMHO. The "reset" switch is a sufficient remedy. > Let me know if I should confirm this by reinstalling the old code > and re-running the test. That won't be needed, thanks for the test and confirmation. I think it's all good :-) Closing #456009 and #456011 with this message. Thanks, JB. -- Julien BLACHE - Debian & GNU/Linux Developer - <[EMAIL PROTECTED]> Public key available on <http://www.jblache.org> - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
