En/na Kel Modderman ha escrit:
On Monday 03 August 2009 08:51:30 Xan wrote:
So, it seems it's a confirmed bug of wpasupplicant.
Please, fix it
Xan.
PS:
The problem:
# ifconfig wlan0 up
r...@caixa:/var/log# ifup wlan0
Line 4: unknown network field 'ssid '.
Line 8: failed to parse network block.
Failed to read or parse configuration
'/etc/wpa_supplicant/wpa_supplicant.conf'.
Failed to bring up wlan0.
and
cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 172.26.0.2
netmask 255.255.0.0
network 172.26.0.0
broadcast 172.26.255.255
gateway 172.26.0.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 80.58.61.250 80.58.61.254
dns-search example.org
# 2009-07. The secondary network interface
allow-hotplug wlan0
iface wlan0 inet static
address 172.26.0.3
netmask 255.255.0.0
network 172.26.0.0
broadcast 172.26.255.255
gateway 172.26.0.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 80.58.61.250 80.58.61.254
dns-search example.org
wpa-ssid 314159
wpa-driver wext
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
#pre-up wpa_supplicant -Bw -Dwext -iethX -c/etc/wpa_supplicant.conf
pre-up wpa_supplicant -D wext -B -i wlan0 -c
/etc/wpa_supplicant/wpa_supplicant.conf
post-down killall -q wpa_supplicant
and
# cat /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
network={
ssid = "314159"
This is wrong syntax, remove the whitespace around the = sign.
Thanks a lot.
proto=WPA
key_mgmt=WPA-PSK
psk="enunlugardelamanchadecuyonombrenopuedoacordarme"
}
Previously, I had not this problem with the same configuration files.
I doubt it, maybe lucky because you seem to configure wpa_supplicant
twice in /etc/network/interfaces (via pre-up and via wpa-* ifupdown hook).
Thanks, Kel.
Thanks, Kel.
Now I get this error:
# ifconfig wlan0 up
r...@caixa:~# ifup wlan0
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
What are the exactly steps I have to do with put up the wlan0? Perhaps a
newbee question, but do I really duplicate steps?
Xan.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
