I tried using wodim from etch (compiled it with dpkg-buildpackage) and I could
burn an Image to a DVD. But the md5 sums didn't match.
I couldn't test growisofs from etch because it wouldn't compile on my machine.
Since I can't use cdrecord instead of growisofs in brasero or k3b I'm still
searching for a frontend with which i can use cdrecord for DVD-burning. I
can't use xcdroast because it expects mkisofs version 2.01. But current
mkisofs in testing/unstable is really genisoimage:
---------------------
$ mkisofs --version
mkisofs 2.01 is not what you see here. This line is only a fake for too clever
GUIs and other frontend applications. In fact, this program is:
genisoimage 1.1.9 (Linux)
----------------------
wodim 1.1.2 output:
-------------------------------------------
$ wodim -v -sao dev=/dev/hdc debian-502a-i386-DVD-1.isoTOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK
limits.scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.2
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD-RAM GH22LP20'
Revision : '1.03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B (DVD+R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R) (current)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1409024 = 1376 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 105757 kB/s 600x CD 76x DVD
FIFO size : 12582912 = 12288 KB
Track 01: data 4479 MB
Total size: 5144 MB (509:42.85) = 2293714 sectors
Lout start: 5145 MB (509:44/64) = 2293714 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1390
Speed set to 22160 KB/s
Starting to write CD/DVD at speed 17.0 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 4479 of 4479 MB written (fifo 100%) [buf 92%] 12.6x.
Track 01: Total bytes read/written: 4697526272/4697526272 (2293714 sectors).
Writing time: 362.569s
Average write speed 10.5x.
Min drive buffer fill was 0%
Total of 1671 possible drive buffer underruns predicted.
Fixating...
Fixating time: 11.687s
--------------------------------------------------------------
Best Regards,
Martin
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
