Hi Thanks for answer. Here is the command results *fatal...@squeeze:~$ dmesg | grep ttyS [ 0.480071] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.480323] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A*
*sudo su r...@squeeze:/home/fatality# cu -l /dev/ttyS0 -s 9600 cu: open (/dev/ttyS0): Permission denied cu: /dev/ttyS0: Line in use* *r...@squeeze:/home/fatality# cu -l /dev/ttyS1 -s 9600 cu: open (/dev/ttyS1): Permission denied cu: /dev/ttyS1: Line in use* *r...@squeeze:/home/fatality# id fatality uid=1000(fatality) gid=1000(fatality) groups=1000(fatality),4(adm),20(dialout),21(fax),24(cdrom),25(floppy),26(tape),29(audio),30(dip),44(video),46(plugdev),105(fuse),107(powerdev),110(netdev),116(lpadmin),117(vboxusers),123(scanner) * Same command results with non-root user fatal...@squeeze:~$ cu -l /dev/ttyS0 -s 9600 -d cu: open (/dev/ttyS0): Permission denied cu: /dev/ttyS0: Line in use *Some extra info: r...@squeeze:/home/fatality# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 1: uart:unknown port:000002F8 irq:3 2: uart:unknown port:000003E8 irq:4 3: uart:unknown port:000002E8 irq:3 * Thanks again 2011/1/12 Luis Mondesi <[email protected]> > 1. are you a member of the group that owns your serial port (/dev/ttyS0 or > ttyS1?) > 2. what if you use "cu" like: cu -l /dev/ttyS0 -s 9600 > 3. what did your kernel think is the ttyS* port? (grep ttyS /var/log/dmesg) > > It's possible that your udev rules are messed up somehow and you don't have > the right special files. Verify everything first. > > On Jan 12, 2011, at 2:56 AM, jin&hitman&Barracuda wrote: > > Hi . > > I was working on my Cisco Router with serial port for configure the IOS. I > can see the terminal results on the screen but i can not send any signal or > character with keyboard on Minicom 2.4. > I'm still using the same cable on other os (RedHat, OpenBSD, win...) and it > is working. I sent some order, character and signal same cable. There is a > status bar on the minicom and allways writing "Offline" marked with red > color. > After some hours, i changed my mind, now i'm using cutecom. But it doesn't > work. every thing still same it was. > > Please, Can anyone tell me what is problem/s? > I'm using Squueze. Have nice day. > Thanks, Fatih > -- > > -- > From HemiB A R R A C U D A ! > > > -- > Luis Mondesi > [email protected] > > > > > -- >From HemiB A R R A C U D A !
