I know, how to kill process. But i tried and it doesn't work. Everything is same. i will try in init level 1. I'll back again. See you soon...
2011/1/12 Luis Mondesi <[email protected]> > It looks like you simply need to close the process that's using the serial > port. > > If you don't know how to do this, and this is a desktop, you can simply > reboot it. > > On Jan 12, 2011, at 1:36 PM, jin&hitman&Barracuda wrote: > > Hi > Thanks for answer. > Here is the command results > > *fatal...@squeeze:~$ dmesg | grep ttyS > [ 0.480071] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.480323] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A* > > *sudo su > r...@squeeze:/home/fatality# cu -l /dev/ttyS0 -s 9600 > cu: open (/dev/ttyS0): Permission denied > cu: /dev/ttyS0: Line in use* > > *r...@squeeze:/home/fatality# cu -l /dev/ttyS1 -s 9600 > cu: open (/dev/ttyS1): Permission denied > cu: /dev/ttyS1: Line in use* > > > *r...@squeeze:/home/fatality# id fatality > uid=1000(fatality) gid=1000(fatality) > groups=1000(fatality),4(adm),20(dialout),21(fax),24(cdrom),25(floppy),26(tape),29(audio),30(dip),44(video),46(plugdev),105(fuse),107(powerdev),110(netdev),116(lpadmin),117(vboxusers),123(scanner) > * > Same command results with non-root user > fatal...@squeeze:~$ cu -l /dev/ttyS0 -s 9600 -d > cu: open (/dev/ttyS0): Permission denied > cu: /dev/ttyS0: Line in use > > *Some extra info: > r...@squeeze:/home/fatality# cat /proc/tty/driver/serial > serinfo:1.0 driver revision: > 0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 > 1: uart:unknown port:000002F8 irq:3 > 2: uart:unknown port:000003E8 irq:4 > 3: uart:unknown port:000002E8 irq:3 > * > > Thanks again > > > > 2011/1/12 Luis Mondesi <[email protected]> > >> 1. are you a member of the group that owns your serial port (/dev/ttyS0 or >> ttyS1?) >> 2. what if you use "cu" like: cu -l /dev/ttyS0 -s 9600 >> 3. what did your kernel think is the ttyS* port? (grep ttyS >> /var/log/dmesg) >> >> It's possible that your udev rules are messed up somehow and you don't >> have the right special files. Verify everything first. >> >> On Jan 12, 2011, at 2:56 AM, jin&hitman&Barracuda wrote: >> >> Hi . >> >> I was working on my Cisco Router with serial port for configure the IOS. I >> can see the terminal results on the screen but i can not send any signal or >> character with keyboard on Minicom 2.4. >> I'm still using the same cable on other os (RedHat, OpenBSD, win...) and >> it is working. I sent some order, character and signal same cable. There is >> a status bar on the minicom and allways writing "Offline" marked with red >> color. >> After some hours, i changed my mind, now i'm using cutecom. But it >> doesn't work. every thing still same it was. >> >> Please, Can anyone tell me what is problem/s? >> I'm using Squueze. Have nice day. >> Thanks, Fatih >> -- >> >> -- >> From HemiB A R R A C U D A ! >> >> >> -- >> Luis Mondesi >> [email protected] >> >> >> >> >> > > > -- > From HemiB A R R A C U D A ! > > > -- > Luis Mondesi > [email protected] > > > > > -- >From HemiB A R R A C U D A !
