Le Sat, 6 Sep 2008 22:02:19 +0200, "Mag. Dr. Nikolaus Klepp" <[EMAIL PROTECTED]> a écrit :
> Hi! > > Since I updated to 2.6.26-1 (package version 2.6.26-4), I have a seriouse > problem with my sd-slot: > > 1) SD-Card is not working, when I insert it after booting. There are no > entries in /var/log/messages when inserting the card. > > 2) SD-Card is working, when I put it in the slot befor booting. > > 3) when I remove the SD-Card, I get nothing in the logs, the card still shows > up in /proc/partitions. When I reinsert the card, mount it, use it, unmount > it, it works. > > When I replace it with an other SD-card, it does not work. Mount complains > about "specify file system". > > But when I make the Kernel re-read the partition table with: > > sfdisk -R /dev/sdc > > then the SD-slot and /proc/partitions is in sync again. > > Could you give me a hint what is going wrong here? It seames to me that the > kernel does not get the "card removed" or "card insterted" event from the > card reader. > > nik > I had some problems too with solution http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2008-August/000837.html I applied patch on 2.6.26, recompile the kernel and everything was ok hope it´s help you bruno > > > > -- ----------------------------------------------- Bruno Caillier Laboratoire Diagnostics des Plasmas Hors Equilibre Centre Universitaire Jean-François Champollion Place de Verdun 81 012 ALBI Cedex 9 Tel : 05 63 48 64 45 Fax : 09 58 09 97 76 http://www.univ-jfc.fr/recherche/dphe.php ----------------------------------------------- _______________________________________________ Debian-eeepc-devel mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/debian-eeepc-devel
