I've patched the debian kernel - manually - too, but I see no difference. That is, I did not have the hang-at-boot-problem (i've a 8GB SDHC card with ext3).
But the kernel still does not react on the sd-present-switch in of the sd-reader. Does - on your system - the kernel react propperly when you remove the sd-card or insert it after you booted the system? n. Am Montag, 8. September 2008 schrieb [EMAIL PROTECTED]: > I looked at the patch, but the line numbers don't match with the 2.6.26 > source code sd.c, so I manually modified the sd.c by looking for the > appropriate lines and changing them according to the patch. After a loooong > time recompiling the linux-source, I made a new initramfs and installed the > modules and linux, and now my system does not hang at boot with the 16GB > SDHC card inserted and properly recognises and mount the ext3 system on the > card. > > Any way that this patch could be applied to the debian eeepc apt sources so > that we can get a properly modified 2.6.26 linux image (together with the > thermal nocrt=1 hack)? > > Mateo. > > On Saturday 06 September 2008, bruno Caillier wrote: > > Le Sat, 6 Sep 2008 22:02:19 +0200, > > > > "Mag. Dr. Nikolaus Klepp" <[EMAIL PROTECTED]> a écrit : > > > Hi! > > > > > > Since I updated to 2.6.26-1 (package version 2.6.26-4), I have a > > > seriouse problem with my sd-slot: > > > > > > 1) SD-Card is not working, when I insert it after booting. There are no > > > entries in /var/log/messages when inserting the card. > > > > > > 2) SD-Card is working, when I put it in the slot befor booting. > > > > > > 3) when I remove the SD-Card, I get nothing in the logs, the card still > > > shows up in /proc/partitions. When I reinsert the card, mount it, use > > > it, unmount it, it works. > > > > > > When I replace it with an other SD-card, it does not work. Mount > > > complains about "specify file system". > > > > > > But when I make the Kernel re-read the partition table with: > > > > > > sfdisk -R /dev/sdc > > > > > > then the SD-slot and /proc/partitions is in sync again. > > > > > > Could you give me a hint what is going wrong here? It seames to me that > > > the kernel does not get the "card removed" or "card insterted" event > > > from the card reader. > > > > > > nik > > > > I had some problems too > > > > with solution > > http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2008-August/0 > >00 837.html > > > > I applied patch on 2.6.26, > > recompile the kernel > > and everything was ok > > > > hope it´s help you > > > > bruno > > _______________________________________________ > Debian-eeepc-devel mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/debian-eeepc-devel -- Mag. Dr. Nikolaus Klepp IT Consultant Einnehmerstraße 14 A-4810 Gmunden Tel.: +43 650 82 11 724 email: [EMAIL PROTECTED] _______________________________________________ Debian-eeepc-devel mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/debian-eeepc-devel
