2009/4/3 Damyan Ivanov <[email protected]>: > -=| Santi Béjar, Fri, Apr 03, 2009 at 09:13:50AM +0200 |=- >> 2009/4/3 Damyan Ivanov <[email protected]>: >> > -=| Santi Béjar, Fri, Apr 03, 2009 at 01:12:17AM +0200 |=- >> >> >> >> Just notice that the: >> >> >> >> echo $brightness > $brn_control >> >> >> >> in /etc/acpi/actions/suspend.sh does not seems to be necessary (but it >> >> does not hurt neither) >> > >> > Can someone confirm this is no longer necessary on .26 kernels too? >> >> I've tested with .26 from stable/testing with the rest from sid and >> can also confirm it. > > Thanks. I'll remove these parts of the scripts. > >> At the same time I´ve tested the rest of the eeepc-acpi-scripts, and >> the only thing I notice is that wlan does not come back after a >> suspend/resum or toggle the wlan buttom. I've track it till the >> pciehp_slot_with_bus=0: >> >> $ head /sys/modules/pciehp/parameters/* >> ==> parameters/pciehp_debug <== >> N >> >> ==> parameters/pciehp_force <== >> N >> >> ==> parameters/pciehp_poll_mode <== >> N >> >> ==> parameters/pciehp_poll_time <== >> 0 >> >> ==> parameters/pciehp_slot_with_bus <== >> N >> >> I don't know why the slot_with_bus is zero, when I reran the >> /etc/init.d/eeepc it loads the module with slot_with_bus=1. > > Perhaps the module is unloaded before suspend and reloaded after > resume?
But it happens with a fresh boot. After a fresh boot the slot_with_bus is N, and then toggling the wlan does not work. Santi _______________________________________________ Debian-eeepc-devel mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/debian-eeepc-devel
