Adaptec Starfire 6915, 4 port ethernet card works fine with kernel 2.4.18 starfire.c:v1.03 7/26/2000 Written by Donald Becker <[EMAIL PROTECTED]> (unofficial 2.2/2.4 kernel port, version 1.03+LK1.3.5, November 17, 2001) eth1: Adaptec Starfire 6915 at 0xf8802000, 00:00:d1:ee:c4:2d, IRQ 10. eth1: MII PHY found at address 1, status 0x7809 advertising 01e1. eth1: scatter-gather and hardware TCP cksumming disabled. eth2: Adaptec Starfire 6915 at 0xf8883000, 00:00:d1:ee:c4:2e, IRQ 5. eth2: MII PHY found at address 1, status 0x7809 advertising 01e1. eth2: scatter-gather and hardware TCP cksumming disabled. eth3: Adaptec Starfire 6915 at 0xf8904000, 00:00:d1:ee:c4:2f, IRQ 9. eth3: MII PHY found at address 1, status 0x7809 advertising 01e1. eth3: scatter-gather and hardware TCP cksumming disabled. eth4: Adaptec Starfire 6915 at 0xf8985000, 00:00:d1:ee:c4:30, IRQ 11. eth4: MII PHY found at address 1, status 0x7809 advertising 01e1. eth4: scatter-gather and hardware TCP cksumming disabled.
It's 64 bit but works in 32 bit mode. On Wed, Jul 10, 2002 at 05:17:58PM -0400, Lee Bradshaw wrote: > I need at least a 2-port (or preferably 4-port) 10BT (10/100 would be > ok) ethernet card for a firewall. It's a small machine - bigger than a > laptop, smaller than a vcr - with only 1 PCI slot. Does anyone have any > recommendations for a 32-bit/33 MHz PCI card that works with linux? > > Thanks, > Lee -- Rafael The Gap Between the Rich and the Poor is Constant. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
