On Wed, 10 Jul 2002, Lee Bradshaw wrote: > I need at least a 2-port (or preferably 4-port) 10BT (10/100 would be > ok) ethernet card for a firewall. It's a small machine - bigger than a > laptop, smaller than a vcr - with only 1 PCI slot. Does anyone have any > recommendations for a 32-bit/33 MHz PCI card that works with linux?
DFE-570TX 4-Port Server Network Adapter http://www.dlink.com/products/adapters/dfe570tx/ Costs (last I checked) a fraction of the Adaptec's quad. Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip0: MII transceiver #1 config 3100 status 7869 advertising 01e1. eth0: Digital DS21143 Tulip rev 65 at 0x9800, 00:80:C8:CA:4E:95, IRQ 15. tulip1: EEPROM default media type Autosense. tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip1: MII transceiver #1 config 3100 status 7849 advertising 01e1. eth1: Digital DS21143 Tulip rev 65 at 0x9400, 00:80:C8:CA:4E:96, IRQ 5. tulip2: EEPROM default media type Autosense. tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip2: MII transceiver #1 config 3100 status 7849 advertising 01e1. eth2: Digital DS21143 Tulip rev 65 at 0x9000, 00:80:C8:CA:4E:97, IRQ 11. tulip3: EEPROM default media type Autosense. tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip3: MII transceiver #1 config 3100 status 7869 advertising 01e1. eth3: Digital DS21143 Tulip rev 65 at 0x8800, 00:80:C8:CA:4E:98, IRQ 10. Cheers, Cristian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
