Thanks, that was clear enough ;) I may need some experimenting to really understand, though.
| But, if that's what you mean, | the hardware source and destination addresses are not visible in the | iptables chains and logs. However they are visible with a packet | sniffer, such as tcpdump with the -e option. Yes that's what i wanted to know. | ip route list table local spits out: broadcast 192.168.1.0 dev eth0 proto kernel scope link src 192.168.1.2 broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1 local 192.168.1.2 dev eth0 proto kernel scope host src 192.168.1.2 broadcast 192.168.1.255 dev eth0 proto kernel scope link src 192.168.1.2 broadcast 127.0.0.0 dev lo proto kernel scope link src 127.0.0.1 local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1 local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1 I think (and hope) this is a very common configuration, then. thx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
