Hi, The package now has failed to build on armel, i386, s390x and irscv64 arch due to test case failed:
``` (sid-riscv64-sbuild)root@unmatched:/home/vimer/build/08/52_haskell-hdf5/haskell-hdf5-1.8.10# debian/hlibrary.setup test --builddir=dist-ghc --show-details=direct Running 1 test suites... Test suite hdf5-test: RUNNING... hdf5-test: unknown RTS option: -N hdf5-test: hdf5-test: Usage: <prog> <args> [+RTS <rtsopts> | -RTS <args>] ... --RTS <args> hdf5-test: hdf5-test: +RTS Indicates run time system options follow hdf5-test: -RTS Indicates program arguments follow hdf5-test: --RTS Indicates that ALL subsequent arguments will be given to the hdf5-test: program (including any of these RTS flags) hdf5-test: hdf5-test: The following run time system options are available: hdf5-test: hdf5-test: -? Prints this message and exits; the program is not executed hdf5-test: --info Print information about the RTS used by this program hdf5-test: hdf5-test: --nonmoving-gc hdf5-test: Selects the non-moving mark-and-sweep garbage collector to hdf5-test: manage the oldest generation. hdf5-test: --copying-gc hdf5-test: Selects the copying garbage collector to manage all generations. hdf5-test: hdf5-test: -K<size> Sets the maximum stack size (default: 80% of the heap) hdf5-test: Egs: -K32k -K512k -K8M hdf5-test: -ki<size> Sets the initial thread stack size (default 1k) Egs: -ki4k -ki2m hdf5-test: -kc<size> Sets the stack chunk size (default 32k) hdf5-test: -kb<size> Sets the stack chunk buffer size (default 1k) hdf5-test: hdf5-test: -A<size> Sets the minimum allocation area size (default 1m) Egs: -A20m -A10k hdf5-test: -AL<size> Sets the amount of large-object memory that can be allocated hdf5-test: before a GC is triggered (default: the value of -A) hdf5-test: -F<n> Sets the collecting threshold for old generations as a factor of hdf5-test: the live data in that generation the last time it was collected hdf5-test: (default: 2.0) hdf5-test: -n<size> Allocation area chunk size (0 = disabled, default: 0) hdf5-test: -O<size> Sets the minimum size of the old generation (default 1M) hdf5-test: -M<size> Sets the maximum heap size (default unlimited) Egs: -M256k -M1G hdf5-test: -H<size> Sets the minimum heap size (default 0M) Egs: -H24m -H1G hdf5-test: -xb<addr> Sets the address from which a suitable start for the heap memory hdf5-test: will be searched from. This is useful if the default address hdf5-test: clashes with some third-party library. hdf5-test: -xn Use the non-moving collector for the old generation. hdf5-test: -m<n> Minimum % of heap which must be available (default 3%) hdf5-test: -G<n> Number of generations (default: 2) hdf5-test: -c<n> Use in-place compaction instead of copying in the oldest generation hdf5-test: when live data is at least <n>% of the maximum heap size set with hdf5-test: -M (default: 30%) hdf5-test: -c Use in-place compaction for all oldest generation collections hdf5-test: (the default is to use copying) hdf5-test: -w Use mark-region for the oldest generation (experimental) hdf5-test: -I<sec> Perform full GC after <sec> idle time (default: 0.3, 0 == off) hdf5-test: hdf5-test: -T Collect GC statistics (useful for in-program statistics access) hdf5-test: -t[<file>] One-line GC statistics (if <file> omitted, uses stderr) hdf5-test: -s[<file>] Summary GC statistics (if <file> omitted, uses stderr) hdf5-test: -S[<file>] Detailed GC statistics (if <file> omitted, uses stderr) hdf5-test: hdf5-test: hdf5-test: -Z Don't squeeze out update frames on context switch hdf5-test: -B Sound the bell at the start of each garbage collection hdf5-test: -h Heap residency profile (output file <program>.hp) hdf5-test: -hT Produce a heap profile grouped by closure type hdf5-test: -i<sec> Time between heap profile samples (seconds, default: 0.1) hdf5-test: hdf5-test: -C<secs> Context-switch interval in seconds. hdf5-test: 0 or no argument means switch as often as possible. hdf5-test: Default: 0.02 sec. hdf5-test: -V<secs> Master tick interval in seconds (0 == disable timer). hdf5-test: This sets the resolution for -C and the heap profile timer -i, hdf5-test: and is the frequency of time profile samples. hdf5-test: Default: 0.01 sec. hdf5-test: hdf5-test: --install-signal-handlers=<yes|no> hdf5-test: Install signal handlers (default: yes) hdf5-test: --io-manager=<native|posix> hdf5-test: The I/O manager subsystem to use. (default: posix) hdf5-test: -e<n> Maximum number of outstanding local sparks (default: 4096) hdf5-test: -xq The allocation limit given to a thread after it receives hdf5-test: an AllocationLimitExceeded exception. (default: 100k) hdf5-test: hdf5-test: -Mgrace=<n> hdf5-test: The amount of allocation after the program receives a hdf5-test: HeapOverflow exception before the exception is thrown again, if hdf5-test: the program is still exceeding the heap limit. hdf5-test: hdf5-test: RTS options may also be specified using the GHCRTS environment variable. hdf5-test: hdf5-test: Other RTS options may be available for programs compiled a different way. hdf5-test: The GHC User's Guide has full details. hdf5-test: Test suite hdf5-test: FAIL Test suite logged to: dist-ghc/test/hdf5-1.8.10-hdf5-test.log 0 of 1 test suites (0 of 1 test cases) passed. ``` Here: https://buildd.debian.org/status/package.php?p=haskell-hdf5 in fact, the dist-ghc/test/hdf5-1.8.10-hdf5-test.log file is empyt: ``` (sid-riscv64-sbuild)root@unmatched:/home/vimer/build/08/52_haskell-hdf5/haskell-hdf5-1.8.10# cat dist-ghc/test/hdf5-1.8.10-hdf5-test.log Test suite hdf5-test: RUNNING... Test suite hdf5-test: FAIL Test suite logged to: dist-ghc/test/hdf5-1.8.10-hdf5-test.log ``` Any help will be appreicated. (PS: I want to open reportbug with patch:) ) BR, Bo
