Hi, Following the advice of my previous post. Downloaded the sarge-hppa iso's should be RC3! >From http://ftp.acc.umu.se/pub/cd-images/debian-weekly/hppa/
I get the same output using 0/vmlinux32 or 0/vmlinux64 Path Number Device Path Device Type PO IDE FX4830T Main Menu: Enter command > boot P0 Interact with IPL (Y, N, Q)?> y Booting Boot IO Dependent Code (IODC) revision 0 Hard Booted. Palo ipl 1.5 [EMAIL PROTECTED] Boot Image contains : 0/vmlinux32 0/vmlinux64 0/ramdisk Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (graphics). Current command line: '0/vmlinux ramdisk_size=8192 root=/dev/ram initrd=0/ramdisk' console=tty0 sti=10 /1/3/0 sti_font=VGA8x16 TERM=linux 0: '0/vmlinux 1: ramdisk_size=8192 2: root=/dev/ram 3: initrd=0/ramdisk' 4: console=tty0 5: sti=10/1/3/0 6: sti_font=VGA8x16 7: TERM=linux <#> edit the numbrered field 'b' boot with this command line 'r' restore command line 'l' list dir ?b Screen full of stuff ends with the following. RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (-28 != 32768) 8388608 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 316k freed attempt to access beyond end of device ram0: rw=0, want=26816, limit=16384 attempt to access beyond end of device ram0: rw=0, want=26816, limit=16384 Warning: unable to open an initial console. attempt to access beyond end of device ram0: rw=0, want=26816, limit=16384 EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block - inode=1813, block=14263 attempt to access beyond end of device ram0: rw=0, want=26816, limit=16384 EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block - inode=1933, block=14278 Kernel panic: No init found. Try passing init= option to kernel. Suggestions, hints or pointers greatly appreciated. Thanks W. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
