Hello All,
First off, I'm not sure this is the correct venue for this topic, so if I should post to help-hurd, hurd-devel or some other list, please let me know.
I've built OSKit-Mach and have attempted to install it on my machine which is an AMD K7 with a VIA VT82C586B main board. My main reason for this is that with the default kernel, I am unable to see my second onboard ide controller, which is a Promise PDC202xx, with the default kernel. During my searches it appeared to me that Joachim Nilsson had worked on a patch for ATA100 support, and I hoped that by it's absense on his hurd page, http://hurd.gnufans.org/bin/view/Hurd/JoachimNilssonHurdPage that it was now in cvs.
Unfortunatly oskit-mach does not load for me at all. My initial build included no debug suppport, so I don't have much info on this other than the console output.
Welcome to GNU Mach 1.91! Kernel page fault at address 0x1, eip = 0x1 Kernel Page fault trap, eip 0x1 kernel trap, type 14, code = 0 Dump of trap_state at 0x002aafb8: EAX 0000dfdf EBX 00117930 ECX 00000007 EDX 00000000 ESI 00000000 EDI 00000000 EBP 218f6fd8 ESP 002aaffc EIP 00000001 EFLAGS 00010002 CS 0010 SS 0028 DS 0028 ES 0028 FS 0000 GS 0000 trapno 14, error 00000000, from kernel mode page fault linear address c0000001 c0000001 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 trap Backtrace: fp=2aaf48 0022f049 0013e013 001412cb _exit(1) called; rebooting...
If anyone has any ideas or pointers please let me know.
Thanks
Chris
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
