Hi, I've downloaded the Hurd installation CD 1 from <http://ftp.gnuab.org/pub/debian-cd/K8/> and installed it.
Hurd is on /dev/hda1 (10GB, ext2, o=hurd), when I mount this partition from Linux, I can see the Hurd-files. When I try to start Hurd from the grub (v0.96) cli, like described here <http://www.debian.org/ports/hurd/hurd-install>, the kernel and the modules seem to be loaded (I got the Multiboot-confirmations, but with other numbers), but when I start the Hurd with "boot", my computer restarts with no error message. Like I've written, Hurd is installed on /dev/hda1, so I used "device:hd1s1" as root. My machine was an Athlon XP 2200 with a SIS chipset and a Nvidia GF5200FX graphics card and 1GB RAM. This is my /proc/interrupts from Linux: CPU0 0: 90994297 IO-APIC-edge timer 1: 5091 IO-APIC-edge i8042 7: 0 IO-APIC-edge parport0 9: 0 IO-APIC-level acpi 12: 243359 IO-APIC-edge i8042 14: 414267 IO-APIC-edge ide0 15: 3211345 IO-APIC-edge ide1 16: 5523621 IO-APIC-level nvidia 18: 3917829 IO-APIC-level SiS SI7012 19: 2853019 IO-APIC-level eth0 23: 0 IO-APIC-level ehci_hcd NMI: 0 LOC: 90997091 ERR: 0 MIS: 0 How can I get Hurd running on my machine? Thomas -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
