I doubt Thomas, U have mentioned /dev/hda1
It means the primary master on the first ide Slot So the equivalent device naming convention would be hd0s1 and not hd1s1 (as u have written) Try that out Hope I am of some help .... Keep me informed .. mail me at [EMAIL PROTECTED] or [EMAIL PROTECTED] Regards, Shailesh India, Mumbai On 4/13/05, Thomas Schlesinger <[EMAIL PROTECTED]> wrote: > Hi, > > I've downloaded the Hurd installation CD 1 from > <http://ftp.gnuab.org/pub/debian-cd/K8/> and installed it. > > Hurd is on /dev/hda1 (10GB, ext2, o=hurd), when I mount this partition from > Linux, I can see the Hurd-files. > > When I try to start Hurd from the grub (v0.96) cli, like described here > <http://www.debian.org/ports/hurd/hurd-install>, the kernel and the modules > seem to be loaded (I got the Multiboot-confirmations, but with other > numbers), but when I start the Hurd with "boot", my computer restarts with > no error message. > > Like I've written, Hurd is installed on /dev/hda1, so I used "device:hd1s1" > as root. > > My machine was an Athlon XP 2200 with a SIS chipset and a Nvidia GF5200FX > graphics card and 1GB RAM. > > This is my /proc/interrupts from Linux: > > CPU0 > 0: 90994297 IO-APIC-edge timer > 1: 5091 IO-APIC-edge i8042 > 7: 0 IO-APIC-edge parport0 > 9: 0 IO-APIC-level acpi > 12: 243359 IO-APIC-edge i8042 > 14: 414267 IO-APIC-edge ide0 > 15: 3211345 IO-APIC-edge ide1 > 16: 5523621 IO-APIC-level nvidia > 18: 3917829 IO-APIC-level SiS SI7012 > 19: 2853019 IO-APIC-level eth0 > 23: 0 IO-APIC-level ehci_hcd > NMI: 0 > LOC: 90997091 > ERR: 0 > MIS: 0 > > How can I get Hurd running on my machine? > > Thomas > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- They say Love is Blind...... But Marriage is definitely an EYE OPENER
