On Mon, 28 Mar 2005 12:43:34 -0700 Bjorn Helgaas <[EMAIL PROTECTED]> wrote:
: Is this a rebadged Intel box? I wonder if it's like my Tiger, : which reports : ttyS0 at 0x03f8 (irq = 44) is a 16550A : ttyS1 at 0x02f8 (irq = 45) is a 16550A : : but ttyS0 is buried somewhere with no visible connector. The : connector on the back panel is actually *ttyS1*. Try changing : the "console=" argument to : console=uart,io,0x2f8 : : Seems like it was designed by the same folks who put our UART : console on a function 1 of a multi-function PCI card, with the : UPS port on function 0. Ugh. : It certainly shows that same behaviour. ARG! (FWIW, "console=ttyS1,9600,8n1" does work with 2.6 kernels.) Ok, actual stuff came from it, which is a little suprising (because none of the stuff showed on screen). The boot log is included. At the 'mice:' line, it pauses for about 5 wall clock seconds, then reboots. Loading.: Debian GNU/Linux Starting: Debian GNU/Linux ELILO ELILO boot: Linux-2.6.10 Uncompressing Linux... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done Loading initrd \EFI\debian\boot\initrd.img-2.6.10-1-mckinley...|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done Linux version 2.6.10-1-mckinley ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-10)) #1 Sun Mar 13 04:58:26 MST 2005 EFI v1.10 by INTEL: SALsystab=0x3fe4c8c0 ACPI=0x3ffa2000 ACPI 2.0=0x3ffa1000 MPS=0x3ffa0000 SMBIOS=0xf0000 booting generic kernel on platform dig Warning: acpi_table_parse(ACPI_SRAT) returned 0! Warning: acpi_table_parse(ACPI_SLIT) returned 0! efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0 efi.trim_top: ignoring 24KB of memory at 0x1000 due to granule hole at 0x0 efi.trim_top: ignoring 8KB of memory at 0x7000 due to granule hole at 0x0 efi.trim_top: ignoring 484KB of memory at 0x9000 due to granule hole at 0x0 efi.trim_top: ignoring 4KB of memory at 0x84000 due to granule hole at 0x0 efi.trim_top: ignoring 108KB of memory at 0x85000 due to granule hole at 0x0 efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to granule hole at 0x0 Initial ramdisk at: 0xe00000003c22c000 (6946816 bytes) SAL 3.1: Intel Corp SR870BH2 version 3.0 SAL Platform features: BusLock IRQ_Redirection iosapic_system_init: Disabling PC-AT compatible 8259 interrupts ACPI: Local APIC address c0000000fee00000 ACPI: [APIC:0x07] ignored 1 entries of 2 found PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector 30 register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level 1 CPUs available, 1 CPUs total MCA related initialization done Virtual mem_map starts at 0xa0007fffffc80000 Built 1 zonelists Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/vmlinuz-2.6.10-1-mckinley root=/dev/sda2 console=ttyS1,9600,8n1 ro PID hash table entries: 2048 (order: 11, 65536 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 5, 524288 bytes) Placing software IO TLB between 0x4670000 - 0x8670000 Memory: 940928k/1012608k available (3972k code, 84768k reserved, 2075k data, 336k init) McKinley Errata 9 workaround not needed; disabling it Security Framework v1.0.0 initialized Mount-cache hash table entries: 1024 (order: 0, 16384 bytes) checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 6784kB freed NET: Registered protocol family 16 ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using IOSAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 ACPI: PCI Root Bridge [PCI1] (00:02) ACPI: PCI Root Bridge [PCI2] (00:05) ACPI: Device [CSFF] status [00000008]: functional but not present; setting present ACPI: PCI Root Bridge [CSFF] (00:ff) PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to [EMAIL PROTECTED] ** so I can fix the driver. perfmon: version 2.0 IRQ 238 perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits) perfmon: added sampling format default_format perfmon_default_smpl: default_format v2.0 registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API EFI Time Services Driver v0.4 serio: i8042 AUX port at 0x60,0x64 irq 36 serio: i8042 KBD port at 0x60,0x64 irq 32 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled acpi_serial_port: zero-length IO port range? ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A acpi_serial_port: zero-length IO port range? ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize mice: PS/2 mouse device common for all mice
