Any ideas?
On Thu, 14 Apr 2005 16:31:29 -0700 Peter Hessler <[EMAIL PROTECTED]> wrote: : On Tue, 29 Mar 2005 17:00:38 -0700 : Bjorn Helgaas <[EMAIL PROTECTED]> wrote: : : : On Tue, 2005-03-29 at 15:52 -0800, Peter Hessler wrote: : : > : : > ... : : > Calling initcall 0xa000000100495a30: mousedev_init+0x0/0x1e0() : : > mice: PS/2 mouse device common for all mice : : > Calling initcall 0xa000000100493e70: atkbd_init+0x0/0x40() : : > ... : : > Then the pause and bounce. : : : : We've reproduced the problem on a Tiger, so I think we : : should be able to figure it out. It *does* work with : : the current BK kernel, so we just have to figure out : : what fixed it. : : : : Ok, I just tried the new 2.6.11-1-mckinley kernel that was very : recently mentioned, and still no dice. It gets slightly farther, but : the same behaivour (pause and bounce). : : : : : Loading.: Debian GNU/Linux : Starting: Debian GNU/Linux : ELILO : : ELILO boot: Linux-2.6.11 : Uncompressing Linux... done : Loading initrd \EFI\debian\boot\initrd.img-2.6.11-1-mckinley...done : Linux version 2.6.11-1-mckinley ([EMAIL PROTECTED]) (gcc version 3.3.5 : (Debian 1:3.3.5-12)) #1 Sat Mar 26 21:49:57 MST 2005 EFI v1.10 by : INTEL: SALsystab=0x3fe4c8c0 ACPI=0x3ffa2000 ACPI 2.0=0x3ffa1000 : INTEL: MPS=0x3ffa0000 SMBIOS=0xf0000 booting generic kernel on : platform dig ACPI: RSDP (v002 INTEL ) : @ 0x000000003ffa1000 ACPI: XSDT (v001 INTEL SR870BH2 0x01072002 MSFT : 0x00010013) @ 0x000000003ffa1090 ACPI: FADT (v003 INTEL SR870BH2 : 0x01072002 MSFT 0x00010013) @ 0x000000003ffa1138 ACPI: MADT (v001 : INTEL SR870BH2 0x01072002 MSFT 0x00010013) @ 0x000000003ffa1230 ACPI: : DSDT (v001 Intel SR870BH2 0x00000000 MSFT 0x0100000d) @ : 0x0000000000000000 efi.trim_top: ignoring 4KB of memory at 0x0 due to : granule hole at 0x0 efi.trim_top: ignoring 24KB of memory at 0x1000 : due to granule hole at 0x0 efi.trim_top: ignoring 8KB of memory at : 0x7000 due to granule hole at 0x0 efi.trim_top: ignoring 484KB of : memory at 0x9000 due to granule hole at 0x0 efi.trim_top: ignoring : 4KB of memory at 0x84000 due to granule hole at 0x0 efi.trim_top: : ignoring 108KB of memory at 0x85000 due to granule hole at 0x0 : efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to : granule hole at 0x0 Initial ramdisk at: 0xe00000003c21e000 (6995968 : bytes) SAL 3.1: Intel Corp : SR870BH2 version 3.0 SAL Platform features: : BusLock IRQ_Redirection iosapic_system_init: Disabling PC-AT : compatible 8259 interrupts ACPI: Local APIC address c0000000fee00000 : ACPI: [APIC:0x07] ignored 1 entries of 2 found PLATFORM int CPEI : ACPI: (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector : 30 register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC- : level 1 CPUs available, 1 CPUs total MCA related initialization done : Virtual mem_map starts at 0xa0007fffffc80000 : On node 0 totalpages: 63284 : DMA zone: 63284 pages, LIFO batch:4 : Normal zone: 0 pages, LIFO batch:1 : HighMem zone: 0 pages, LIFO batch:1 : Built 1 zonelists : Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/ : vmlinuz-2.6.11-1-mckinley root=/dev/sda2 console=ttyS1,9600,8n1 debug : initcall_debug ro PID hash table entries: 2048 (order: 11, 65536 : bytes) CPU 0: base freq=199.457MHz, ITC ratio=10/2, ITC : freq=997.285MHz : Console: colour VGA+ 80x25 Placing software IO TLB between 0x13d4000 - : Console: 0x1bd4000 : Memory: 1000000k/1012544k available (4024k code, 25664k reserved, : 2096k data, 336k init) McKinley Errata 9 workaround not needed; : disabling it Calibrating delay loop... 1494.72 BogoMIPS (lpj=729088) : Security Framework v1.0.0 initialized : Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes) : Inode-cache hash table entries: 65536 (order: 5, 524288 bytes) : Mount-cache hash table entries: 1024 (order: 0, 16384 bytes) : checking if image is initramfs...it isn't (bad gzip magic numbers); : looks like an initrd Freeing initrd memory: 6816kB freed : Calling initcall 0xa0000001004a8680: init_elf32_binfmt+0x0/0x40() : Calling initcall 0xa0000001004aa940: helper_init+0x0/0xa0() : Calling initcall 0xa0000001004ab0b0: pm_init+0x0/0x80() : Calling initcall 0xa0000001004ab380: ksysfs_init+0x0/0x80() : Calling initcall 0xa0000001004abb70: filelock_init+0x0/0x80() : Calling initcall 0xa0000001004ad0c0: init_script_binfmt+0x0/0x40() : Calling initcall 0xa0000001004ad130: init_elf_binfmt+0x0/0x40() : Calling initcall 0xa0000001004aa190: netlink_proto_init+0x0/0x3c0() : NET: Registered protocol family 16 : Calling initcall 0xa0000001004a7a30: kobject_uevent_init+0x0/0xa0() : Calling initcall 0xa0000001004a8df0: pcibus_class_init+0x0/0x40() : Calling initcall 0xa0000001004a80a0: pci_driver_init+0x0/0x40() : Calling initcall 0xa0000001004ab070: tty_class_init+0x0/0x80() : Calling initcall 0xa00000010049dc80: register_node_type+0x0/0x40() : Calling initcall 0xa0000001004ad2c0: pm_sysrq_init+0x0/0x60() : Calling initcall 0xa0000001004aa630: init_bio+0x0/0x160() : Calling initcall 0xa00000010049ddf0: fbmem_init+0x0/0x140() : Calling initcall 0xa0000001004aa000: acpi_init+0x0/0x100() : ACPI: Subsystem revision 20050211 : ACPI: Interpreter enabled : ACPI: Using IOSAPIC for interrupt routing : Calling initcall 0xa0000001004aa0b0: acpi_pci_root_init+0x0/0x40() : Calling initcall 0xa0000001004aa1e0: acpi_pci_link_init+0x0/0xa0() : Calling initcall 0xa0000001004aa300: acpi_power_init+0x0/0x100() : Calling initcall 0xa0000001004aa390: acpi_system_init+0x0/0x1a0() : Calling initcall 0xa0000001004ad210: acpi_event_init+0x0/0x80() : Calling initcall 0xa0000001004aa6c0: acpi_scan_init+0x0/0xe0() : ACPI: PCI Root Bridge [PCI0] (00:00) : PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 : ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] : ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.H2PB._PRT] : ACPI: PCI Root Bridge [PCI1] (00:02) : ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PA._PRT] : ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PB._PRT] : ACPI: PCI Root Bridge [PCI2] (00:05) : ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PA._PRT] : ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PB._PRT] : ACPI: Device [CSFF] status [00000008]: functional but not present; : setting present ACPI: PCI Root Bridge [CSFF] (00:ff) : Calling initcall 0xa0000001004ad620: misc_init+0x0/0x140() : Calling initcall 0xa0000001004ab960: genhd_device_init+0x0/0xa0() : Calling initcall 0xa0000001004a7230: input_init+0x0/0x240() : Calling initcall 0xa0000001004a9e90: pci_acpi_init+0x0/0x240() : PCI: Using ACPI for IRQ routing : ** PCI interrupts are no longer routed automatically. If this : ** causes a device to stop working, it is probably because the : ** driver failed to call pci_enable_device(). As a temporary : ** workaround, the "pci=routeirq" argument restores the old : ** behavior. If this argument makes the device work again, : ** please email the output of "lspci" to [EMAIL PROTECTED] : ** so I can fix the driver. : Calling initcall 0xa0000001004ad460: sba_init+0x0/0xe0() : Calling initcall 0xa0000001004abb10: sn_pci_init+0x0/0x200() : Calling initcall 0xa0000001004a7d90: net_dev_init+0x0/0x340() : Calling initcall 0xa0000001004a9e10: pktsched_init+0x0/0x1c0() : Calling initcall 0xa0000001004a9e70: tc_filter_init+0x0/0x80() : Calling initcall 0xa0000001004a6e90: init_pipe_fs+0x0/0xc0() : Calling initcall 0xa0000001004aa730: acpi_motherboard_init+0x0/0x80() : Calling initcall 0xa0000001004ac100: chr_dev_init+0x0/0x160() : Calling initcall 0xa00000010049f6f0: pfm_init+0x0/0x680() : perfmon: version 2.0 IRQ 238 : perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 : perfmon: bits) : Calling initcall 0xa0000001004a8990: salinfo_init+0x0/0x400() : Calling initcall 0xa0000001004a8e40: create_gate_table+0x0/0x3a0() : Calling initcall 0xa0000001004a90e0: ia64_mca_late_init+0x0/0x220() : Calling initcall 0xa0000001004a6950: topology_init+0x0/0x200() : Calling initcall 0xa0000001004a9510: pfm_default_smpl_init_module : +0x0/0xe0() perfmon: added sampling format default_format : perfmon_default_smpl: default_format v2.0 registered : Calling initcall 0xa0000001004a85a0: ia32_init+0x0/0x120() : Calling initcall 0xa0000001004a86c0: check_elf32_binfmt+0x0/0xc0() : Calling initcall 0xa0000001004a9740: create_proc_profile+0x0/0xe0() : Calling initcall 0xa0000001004a96b0: ioresources_init+0x0/0xc0() : Calling initcall 0xa0000001004ab9c0: uid_cache_init+0x0/0x100() : Calling initcall 0xa0000001004aa460: param_sysfs_init+0x0/0x60() : Calling initcall 0xa0000001004aa830: init_posix_timers+0x0/0x1c0() : Calling initcall 0xa0000001004aac60: init+0x0/0xc0() : Calling initcall 0xa00000010049eee0: kallsyms_init+0x0/0x80() : Calling initcall 0xa0000001004ab2f0: ikconfig_init+0x0/0x80() : Calling initcall 0xa0000001004abe00: init_per_zone_pages_min+0x0/0xc0 : () Calling initcall 0xa0000001004a9d60: pdflush_init+0x0/0x60() : Calling initcall 0xa0000001004a9ee0: cpucache_init+0x0/0x40() : Calling initcall 0xa0000001004aa260: kswapd_init+0x0/0x100() : Calling initcall 0xa0000001004ad180: gate_vma_init+0x0/0x80() : Calling initcall 0xa0000001004aac10: procswaps_init+0x0/0x80() : Calling initcall 0xa0000001004abdf0: init_tmpfs+0x0/0x180() : Calling initcall 0xa0000001004ab7b0: fasync_init+0x0/0x80() : Calling initcall 0xa0000001004ac300: aio_setup+0x0/0xe0() : Calling initcall 0xa0000001004acec0: eventpoll_init+0x0/0x1e0() : Calling initcall 0xa0000001004acf50: init_sys32_ioctl+0x0/0x120() : Calling initcall 0xa0000001004ad2a0: dquot_init+0x0/0x260() : VFS: Disk quotas dquot_6.5.1 : Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) : Calling initcall 0xa0000001004ad5a0: dnotify_init+0x0/0x80() : Calling initcall 0xa0000001004a5b70: init_devpts_fs+0x0/0xc0() : Calling initcall 0xa0000001004a5c40: init_cramfs_fs+0x0/0x60() : Calling initcall 0xa0000001004a5cd0: init_ramfs_fs+0x0/0x40() : Calling initcall 0xa0000001004a5fe0: init_devfs_fs+0x0/0x240() : devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) : devfs: boot_options: 0x0 : Calling initcall 0xa0000001004aa370: ipc_init+0x0/0x60() : Calling initcall 0xa0000001004aa7b0: init_mqueue_fs+0x0/0x1a0() : Calling initcall 0xa0000001004a6040: key_proc_init+0x0/0xa0() : Calling initcall 0xa0000001004a6450: init_crypto+0x0/0x60() : Initializing Cryptographic API : Calling initcall 0xa0000001004a9020: pci_init+0x0/0x80() : Calling initcall 0xa0000001004a7a20: pci_sysfs_init+0x0/0xa0() : Calling initcall 0xa0000001004a85b0: pci_proc_init+0x0/0x140() : Calling initcall 0xa0000001004a0a40: asiliantfb_init+0x0/0xa0() : Calling initcall 0xa0000001004aa1d0: irqrouter_init_sysfs+0x0/0x60() : Calling initcall 0xa0000001004adf40: rand_initialize+0x0/0x220() : Calling initcall 0xa0000001004ab080: tty_init+0x0/0x480() : Calling initcall 0xa0000001004ab2b0: pty_init+0x0/0x60() : Calling initcall 0xa0000001004a2300: scdrv_init+0x0/0x660() : Calling initcall 0xa0000001004abdc0: efi_rtc_init+0x0/0x140() : EFI Time Services Driver v0.4 : Calling initcall 0xa0000001004abfe0: serio_init+0x0/0x100() : Calling initcall 0xa0000001004a4470: i8042_init+0x0/0x3a0() : Calling initcall 0xa0000001004ac9f0: serial8250_init+0x0/0x180() : Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing : enabled Calling initcall 0xa0000001004acaa0: acpi_serial_init+0x0/0x40 : () acpi_serial_port: zero-length IO port range? : ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A : acpi_serial_port: zero-length IO port range? : ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A : Calling initcall 0xa0000001004acc90: serial8250_pci_init+0x0/0x40() : Calling initcall 0xa0000001004acfb0: sn_sal_module_init+0x0/0x200() : Calling initcall 0xa00000010049f970: elevator_global_init+0x0/0x20() : Calling initcall 0xa0000001004a60d0: noop_init+0x0/0x40() : io scheduler noop registered : Calling initcall 0xa0000001004ac390: as_init+0x0/0xe0() : io scheduler anticipatory registered : Calling initcall 0xa0000001004a69b0: deadline_init+0x0/0xe0() : io scheduler deadline registered : Calling initcall 0xa0000001004ad050: cfq_init+0x0/0xc0() : io scheduler cfq registered : Calling initcall 0xa0000001004a6f50: rd_init+0x0/0x3c0() : RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 : blocksize Calling initcall 0xa0000001004a6fc0: net_olddevs_init : +0x0/0xe0() Calling initcall 0xa0000001004a72f0: mousedev_init : +0x0/0x1e0() : mice: PS/2 mouse device common for all mice : Calling initcall 0xa0000001004a50b0: atkbd_init+0x0/0x40() : Calling initcall 0xa0000001004a97e0: init_soundcore+0x0/0xe0() : Calling initcall 0xa0000001004a79d0: sn_salinfo_init+0x0/0x40() : Calling initcall 0xa0000001004a01f0: prominfo_init+0x0/0x2e0() : Calling initcall 0xa0000001004ab7d0: flow_cache_init+0x0/0x160() : Calling initcall 0xa0000001004a9580: llc_init+0x0/0x100() : Calling initcall 0xa0000001004a6b80: snap_init+0x0/0x80() : Calling initcall 0xa0000001004a6e10: rif_init+0x0/0x120() : Calling initcall 0xa0000001004ac060: inet_init+0x0/0x420() : NET: Registered protocol family 2 : IP: routing cache hash table of 32768 buckets, 256Kbytes : TCP established hash table entries: 131072 (order: 6, 1048576 bytes) : TCP bind hash table entries: 65536 (order: 5, 524288 bytes) : TCP: Hash tables configured (established 131072 bind 65536) : Calling initcall 0xa0000001004ad4c0: af_unix_init+0x0/0x100() : NET: Registered protocol family 1 : Calling initcall 0xa0000001004ad750: packet_init+0x0/0xb0() : NET: Registered protocol family 17 : Calling initcall 0xa0000001004a7260: acpi_poweroff_init+0x0/0x80() : Calling initcall 0xa0000001004aaa80: seqgen_init+0x0/0x40() : Calling initcall 0xa0000001004ac920: serial8250_late_console_init : +0x0/0x60() Calling initcall 0xa0000001004acd60: : early_uart_console_switch+0x0/0x160() Calling initcall : 0xa0000001004aa9b0: net_random_reseed+0x0/0x60() RAMDISK: cramfs : 0xa0000001004aa9b0: filesystem found at block 0 : RAMDISK: Loading 6832KiB [1 disk] into ram disk... done. : VFS: Mounted root (cramfs filesystem) readonly. : (pause and bounce) : : /etc/elilo.conf: : ... : image=/boot/vmlinuz-2.6.11-1-mckinley : label=Linux-2.6.11 : root=/dev/sda2 : read-only : append="console=ttyS1,9600,8n1 debug initcall_debug" : initrd=/boot/initrd.img-2.6.11-1-mckinley : ... : -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
