Thanks for the response. maximilian attems - Let me know when the kernel is built and I'll go ahead and try that.
---------------- Thanks Jefferson Cowart [EMAIL PROTECTED] > -----Original Message----- > From: maximilian attems [mailto:[EMAIL PROTECTED] > Sent: Thursday, April 07, 2005 16:26 > To: Daniel Ritz > Cc: Jefferson Cowart; 'Dominik Brodowski'; > [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: Re: Bug#270376: PCMCIA Nic stops working after > upgrading to 2.6.6/7/8 > > On Thu, 07 Apr 2005, Daniel Ritz wrote: > > > On Tuesday 05 April 2005 08:56, Jefferson Cowart wrote: > > > Sorry for the delay in sending this. I ended up getting > back later than > > > expected. In any case the hexdumps are below. Please let > me know if you need > > > anything else. > > > > also sorry for the delay :) > > > > > > > > Under 2.6.5-bk1 > > > =============== > > > (/proc/bus/pci/00/07.0) > > > 0000000 104c ac17 0007 0210 0002 0607 a820 0082 > > > 0000010 8000 000c 00a0 0200 0100 b004 0000 1000 > > > 0000020 f000 103f 0000 1040 f000 107f 4400 0000 > > > 0000030 44fc 0000 4800 0000 48fc 0000 010a 0540 > > > 0000040 0000 0000 0001 0000 0000 0000 0000 0000 > > > 0000050 0000 0000 0000 0000 0000 0000 0000 0000 > > > * > > > 0000080 7020 2800 0000 0000 0000 0000 3822 0ba4 > > > > ^ > > there you go. the intrtie bit is set. this means that both functions > > use INTA to signal the interrupts. but the BIOS is broken > and assigned > > a different irq to function 1 compared to function 0. > > so the reason it broke when the irq-routing patch was merged is that > > irqs are actually probed to see if they work or if the routing needs > > some tuning... > > > > the attached patch should fix it. it's untested 'cos i don't have a > > laptop with TI bridge anymore...but it's simple > > > > rgds > > -daniel > > thanks a lot for your explenations and the provided patch. > i need some sleep right now, but i'll build a kernel > tommorow for jefferson - bug reporter - to test. > > a++ maks > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]